Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores...
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
Pressure sensor module with I2C interface (BMP085)
KAmodLPS25HB is a module that allows the measurement of atmospheric pressure in the range of 260-1260hPa with a resolution of 0.01hPa, and thanks to the embedded regulator and voltage translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V.
KAmodLPS331 is a module that allows the measurement of atmospheric pressure in the range of 260 - 1260 hPa with a resolution of 0.02 hPa. Supply voltage 2.5 - 5.5 V,
KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
BMP180 temperature / pressure sensor module compatible with WeMos D1 mini board.
1.5 hPa resolution pressure sensor from Freescale. The sensor is soldered onto a PCB with 10K pull-up resistors on the I2C pins. Adafruit 992
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
Best low-cost environmental sensing solution with BME280 and Si1132 on one board. The combination of the BME280 sensor and the Si1132 sensor enables measuring temperature, barometric pressure and humidity, UV Index and ambient light at once
Pmod DPG1 is a module with a differential pressure sensor, based on the NXP MP3V5010DP system. The PCB also includes an analogue-digital ADCS7476 converter from Texas Instrument. The module allows to detect the pressure difference between two ports. The SPI interface is used for communication with the module. Digilent 410-333
The module allows the measurement of atmospheric pressure in the range of 260 ... 1260hPa with a resolution of 0.02hPa. It has a built-in stabilizer and translator levels, so you can use it in systems supplied with voltage of 2.5 ... 5.5V. Pololu 2867
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466