zł8.91
Gravity: Triple Axis Accelerometer - module with 3-axis analog MMA7361 accelerometer
ID: 581654
zł67.45
Tax included
zł54.84 tax excl.
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. The product wiki page offers a user manual with sample programs.
Features
- Configurable sensitivity: ± 1.5g/6g
- High sensitivity: 800 mV/g at 1.5 g
- Interface: analog output
- Low Pass Filter
- Voltage: 3.3 to 8V
- Current consumption: 500 μA in measurement mode, 3 μA in standby mode
- Dimensions: 26 x 37 mm
- Weight: 15 g
Kit contains
- Module with a 3-axis analog MMA7361 accelerometer
- 3 x Gravity Cord
581654
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 66
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł46.53
24h
Available quantity: 2
Available
Board with ATmega1280 microcontroller from the AVR family, the user has 54 I/O lines, 14 PWM channels, 16 analog inputs. DFRobot DFR0003
zł89.20
Delivery date unknown
No product available!
Other products in the same category (16)
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
zł25.83
4 weeks
No product available!
Module with a 3-axis KX134 accelerometer. The system has a user selectable measurement scale of ±8/±16/±32/±64 g. There are two Qwiic connectors on the board and holes with a 2.54 mm pitch. SparkFun SEN-17589
zł96.64
24h
Available quantity: 2
Available
Module with a 3-axis H3LIS331DL accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020071
zł158.76
24h
Available quantity: 1
Available
Module with the LIS2DW12 3-axis accelerometer. The system has a user selectable measurement scale of ± 2g/±4g/±8g/±16g. It communicates via the I2C interface. DFRobot SEN0405
zł21.08
24h
Available quantity: 3
Available
This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. Adafruit 2809
zł27.29
24h
Available quantity: 9
Available
No product available!
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
zł28.90
24h
Available quantity: 218
Available
Module with a 3-axis ADXL356B accelerometer with a measuring range up to ± 20g. The board is equipped with a Grove connector and communicates via the analog interface. Seeed Studio 101020637
zł475.55
24h
Available quantity: 1
Available
Module with a 3-axis ADXL343 accelerometer with a configurable measuring range of ±2g/±4g/±8g/±16g. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4097
zł32.32
24h
Available quantity: 2
Available
Module with 3-axis digital accelerator ADXL345, SPI and I2C communication.
zł15.90
6 weeks
No product available!
Module with a 3-axis H3LIS200DL accelerometer. The system has a user selectable wide measurement scale of ±100g/±200g. It communicates via the I2C interface. DFRobot SEN0408
zł77.15
24h
Available quantity: 2
Available
No product available!
KAmodMMA8653FC is a module with NXP's MMA8653FC three-axis accelerometer. The sensor allows the measurement of acceleration in the range of ± 2g / ± 4g / ± 8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor takes place via the I2C interface
zł26.90
24h
Available quantity: 460
Available
Module with BMA456 pedometer, which combines an acceleration sensor and built-in step counting algorithms. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020583
zł38.19
24h
Available quantity: 3
Available
Module with a 3-axis ADXL345 digital accelerometer with a configurable measuring range of ± 2/4/8/16 g. It is supplied with the voltage from 2 to 3.6 V and communicates via the I2C or SPI interface. DFRobot SEN0032
zł32.23
24h
Available quantity: 1
Available
Module with a 3-axis H3LIS331 accelerometer with a measuring range up to ± 400g. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4627
zł147.12
24h
Available quantity: 2
Available
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143