Pololu 2680 - Pololu Mini Plastic Gearmotor Bracket Pair - Wide
ID: 561585
zł23.89
Tax included
zł19.42 tax excl.
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Overview:
These plastic mounting brackets are specifically designed to work with our mini plastic gearmotors (with or without encoders). Both the offset and 90-degree configurations of the mini plastic gearmotors are compatible with these brackets. The brackets are sold in pairs, and four M3×12mm screws and M3 nuts are included (two for each bracket). In some orientations, the mini plastic gearmotors have a lip that causes the bracket to be raised off of the mounting surface; for those cases, two 1.25mm-thick spacer plates (one for each bracket) are also included. You can see the spacer being used in the rightmost picture below.
Dimensions:
| Weight: | 1.2 g1 |
|---|
General specifications:
| Color: | white |
|---|
Notes:
- 1 For a single bracket only (no screws, nuts, or spacers). With a single spacer, it weighs an additional 0.5 g.
561585
You might also like
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
zł26.17
24h
Available quantity: 3
Available
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
zł26.17
24h
Available quantity: 3
Available
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
Delivery date unknown
No product available!
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
zł44.32
24h
Available quantity: 2
Available
This compact, inexpensive plastic gearmotor (high-power brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
zł31.81
24h
Available quantity: 2
Available
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.
zł23.89
24h
Available quantity: 2
Available
Other products in the same category (16)
A set of two white plastic brackets for mounting micro Pololu motors. Mounting screws and nuts are included. Pololu 1086
zł13.57
24h
Available quantity: 3
Available
Extremely versatile gear motor enclosures provide protection for the gears and offer numerous mounting options to fit a variety of custom applications. Suitable for Pololu micro motors series. ROB-12105
zł7.77
24h
Available quantity: 5
Available
No product available!
L-bracket for NEMA17 stepper motor (Bracket L). Allows for safe assembly of the motor in the device
zł4.59
24h
Available quantity: 44
Available
Pololu - 2257
zł19.04
24h
Available quantity: 6
Available
A set of two black plastic brackets for mounting micro Pololu motors. Mounting screws and nuts are included. Pololu 989
zł13.37
6 weeks
No product available!
A set of two white plastic brackets for mounting miniature Polol motors. Mounting screws and nuts included. Extended version. Pololu 1089
zł20.64
24h
Available quantity: 4
Available
These extended aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. The extended “neck” on these brackets allows for a large variety of mounting options. These brackets are sold in pairs, and each bracket comes with two 1″ long #2-56 screws for securing motors to the bracket.
zł23.81
6 weeks
No product available!
A set of two black plastic brackets for mounting micro motors. The set includes mounting screws and nuts. Pimoroni COM0817
zł22.26
24h
Available quantity: 2
Available
These aluminum gearmotor brackets let you securely mount our larger Pololu plastic gearmotors (228:1 offset, 120:1 offset, 200:1 90-degree, and 120:1 90-degree) to your project. These brackets are sold in pairs, and each bracket comes with two 1″ long and two 0.75″ long #2-56 screws for securing different size motors.
zł23.89
24h
Available quantity: 3
Available
These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.
zł42.59
24h
Available quantity: 3
Available
A pair of aluminum brackets with holes for M3 screws for 37D mm gear motors. Pololu 1084
zł46.10
24h
Available quantity: 7
Available
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket. Pololu 2266
zł25.29
24h
Available quantity: 3
Available
No product available!
L-bracket for NEMA23 stepper motor (Bracket L). Allows for safe assembly of the motor in the device
zł8.39
24h
Available quantity: 40
Available
Available
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.