3-CH Relay for Jetson Nano - module with three relays for Jetson Nano
ID: 583765
zł68.99
Tax included
zł56.09 tax excl.
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with electromechanical relays designed to work with NVIDIA Jetson Nano. It is equipped with three 5A / 250VAC relays controlled by digital outputs, and the relay contacts are led out to the ARK screw terminals. The module connects to the minicomputer via a 40-pin GPIO connector. The set includes an acrylic pad isolating the plate from Jetson Nano. The module uses optocouplers that prevent interference from high voltage circuits. There are also LED indicators on the board that indicate the operating status of the relays.
| 1. GPIO 40-pin header | 5. Relay LED indicators |
| 2. Relay screw terminals | 6. Power supply indicator |
| 3. Relay components | 7. Relay control pin selection jumpers |
| 4. Optocouplers |
Pinout description
Features
- 40-pin GPIO connector, plugs directly into Jetson Nano
- Number of channels: 3
- Maximum load: ≤5A 250VAC or ≤5A 30VDC
- Optocoupler isolation, prevents interference from high voltage circuits
- Indicators for monitoring the operating status of the relay
- The control pins can be configured with jumpers
- Acrylic bottom panel isolating the Jetson Nano from the expansion module
- Dimensions: 100 x 79 mm
Kit contains
- 3-CH Relay for Jetson Nano module
- Insulating washer
- Set of screws
583765
Data sheet
- Output current
- 5A
- Number of channels
- 3
- Executive element
- Przekaźnik
You might also like
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU chip and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has a DDR4 4GB RAM memory. NVIDIA Jetson Nano Development Kit rev. B01 945-13450-0000-100
zł1,098.18
24h
Available quantity: 11
Available
Other products in the same category (16)
Uninterruptible power supply (UPS) module for the Jetson Nano, allowing the minicomputer to continue working and shut down safely after a power failure. Uninterruptible power supply included. Waveshare UPS Power Module (EU)
zł115.45
6 weeks
No product available!
5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)
zł1,795.09
4 weeks
No product available!
AR0234 sensor module that works with NVIDIA Jetson Nano and Xavier NX kits. The sensor used has a 2.3 MP sensor and allows video recording at 1920×1200@30fps. It is equipped with a global shutter. ArduCAM B0429
zł529.65
24h
Available quantity: 2
Available
Camera module with IMX219 sensor with a resolution of 8 MP designed for NVIDIA Jetson Nano / Xavier and Raspberry Pi Compute Module. ArduCAM B0342
zł258.83
24h
Available quantity: 1
Available
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
zł249.25
24h
Available quantity: 2
Available
5" LCD TFT display with touch screen. The display is equipped with HDMI and VGA interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H)
zł269.00
24h
Available quantity: 2
Available
Metal housing with a camera holder and a hole for a fan. Designed for the NVIDIA Jetson Orin Nano or Jetson Orin NX development kit. Waveshare JETSON-ORIN-CASE-A
zł66.53
6 weeks
No product available!
Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V
zł16.81
4 weeks
No product available!
4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano
zł383.06
24h
Available quantity: 3
Available
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003
zł1,433.02
6 weeks
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
zł422.16
24h
Available quantity: 1
Available
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 120°. Waveshare IMX219-120 Camera
zł94.14
6 weeks
No product available!
1 MP camera with USB interface. Equipped with a wide-angle lens with a viewing angle of 140°. DFRobot FIT0892
zł104.14
4 weeks
No product available!
Astro Carrier base plate attachment designed to work with the NVIDIA Jetson TX2i module. It has HDMI, USB 3.0 and USB 2.0, Ethernet as well as Mini PCIe and mSATA connectors. The overlay is plugged into the plate-to-board connector available on the Astro base plate. Connect Tech XBG206
zł1,692.68
6 weeks
No product available!
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
zł158.12
24h
Available quantity: 3
Available
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221
zł565.01
24h
Available quantity: 1
Available
The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano