Two-way crossover network 3000Hz 220W
ID: 1182503
5906623445905
zł30.58
Tax included
zł24.86 tax excl.
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 2 to 8 Ω and offers power up to 220 W
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It allows you to split the audio signal into two bands, which can then be connected to a woofer and tweeter with an impedance of 2 to 8 Ω. It offers power up to 220 W and allows you to reproduce the entire acoustic spectrum with high sound quality. It will be used in home and professional audio systems.
Features
- Type: two-way
- Crossover frequency: 3000 Hz
- Frequency band: 55 Hz - 20 kHz
- Slope: 12 dB/oct.
- Power: 220W
- Speaker impedance: 2 to 8 Ω
- Case
- Screw connections
- Dimensions: 65x120mm
1182503
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 18 V and has two outputs with a power of 10 W (left and right) and one with a power of 20 W (bass)
zł43.21
24h
Available quantity: 6
Available
Stereo audio preamplifier based on the LM1036N chip. It allows you to control the bass, treble and volume level
Delivery date unknown
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
zł470.19
Delivery date unknown
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
zł138.20
24h
Available quantity: 2
Available
Other products in the same category (16)
Audio module with 8 Ohm loudspeaker and 8002B amplifier. It can be used as a buzzer and also play high-quality sound. The volume is controlled by a potentiometer. DFRobot FIT0449
zł31.78
24h
Available quantity: 107
Available
Sound terminal expansion board based on STA350BW for STM32 Nucleo
zł194.73
6 weeks
No product available!
The Modeling PWM Signal Mixer Module is a compact device that allows mixing of PWM signals in modeling, allowing for a variety of control of components such as guns, plates and motors. It can be precisely tailored to the user\'s needs and also offers flexibility in control priority settings.
zł25.90
24h
Available quantity: 5
Available
Audio module with DAC, stereo amplifier and display, designed to work with the Raspberry Pi. Pimoroni PIM484
zł128.47
24h
Available quantity: 4
Available
Audio Analyzer is a module with sound analyzer based on the MSGEQ7 system. It divides the sound into seven frequency bands, and then allows you to read the peak levels of each band. It allows you to measure the sound in the following frequencies: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. DFRobot DFR0126
zł90.48
24h
Available quantity: 1
Available
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21250
zł83.01
24h
Available quantity: 2
Available
Audio receiver with Bluetooth 5.0 communication based on the QCC3008 module. It is equipped with an insulated converter that enables power supply with 5 V voltage
zł90.26
24h
Available quantity: 13
Available
Speech recognition module based on the LD3320 chip. Can store up to 50 keywords. It uses two miniJack connectors to connect headphones and a microphone
zł66.90
6 weeks
No product available!
Module with VS1000D chip and SPI Flash memory, which allows you to play sounds in Ogg Vorbix and WAV format stored on a SPI Flash memory. SparkFun DEV-14006
zł94.44
24h
Available quantity: 1
Available
An audio module with a DAC converter and a stereo amplifier designed to work with the Raspberry Pi. Adafruit 3346
zł72.19
24h
Available quantity: 2
Available
Bluetooth 4.1 audio receiver with 3.5mm Jack audio output. It allows you to play files via Bluetooth, from mass memory (pendrive) or microSD card and supports WAV, APE, MP3 and FLAC formats. XY-BT-L
zł12.47
24h
Available quantity: 1
Available
Module with a sound sensor based on an electret microphone and LM358 amplifier. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020023
zł29.74
24h
Available quantity: 3
Available
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 300 W and can work with 4 Ω speakers. Powered by alternating voltage 230 V
zł509.10
24h
Available quantity: 1
Available
Speech recognition module with LD3320 chip, STC11 microcontroller, microphone and loudspeaker output. The board communicates via the UART interface
zł85.88
24h
Available quantity: 1
Available
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
zł17.37
24h
Available quantity: 3
Available
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
zł27.04
24h
Available quantity: 3
Available
Two-way loudspeaker crossover with a crossover frequency of 3000 Hz. It works with speakers with an impedance of 2 to 8 Ω and offers power up to 220 W