32-channel logic analyzer with a sampling frequency of 500 MHz. It can...
Universal case adapted to most popular single-board computers, incl....
Precision cross screwdriver ph0 x 50mm - YT-25835
Slotted precision screwdriver 3.0x50mm - YT-25809
Slotted precision screwdriver 2.0x50mm - YT-25805
Precision Phillips screwdriver 1 x 50 mm - YT-25838
The laboratory meter allows you to measure AC and DC voltage, AC and DC...
The two-channel function/arbitrary generator allows you to generate...
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. Pololu 3107
|Number of digital pins||26|
|Number of PWM channels||7|
|Ilość wejść analogowych||12|
|Logic voltage||5 V|
|Supply voltage min||2,7 V|
|Supply voltages max||11,8 V|
The A-Star 32U4 Prime LV is a programmable board based on Atmel’s ATmega32U4 microcontroller and arranged in the common Arduino form factor. The A-Star Prime offers many additional features and improvements over competing products, including superior power management that enables efficient operation from 2.7 V to 11.8 V. The A-Star 32U4 Prime LV is available in several configurations; item #3107 has no microSD support and includes preinstalled female headers common to many Arduinos.
The Pololu A-Star 32U4 Prime is a general-purpose programmable board based on Atmel’s ATmega32U4 AVR microcontroller and arranged in the common Arduino form factor exemplified by the Uno R3 and Leonardo. As such, the A-Star Prime (abbreviated A* Prime) is compatible with many Arduino shields, including all of the Arduino shields we carry. All 26 of the microcontroller’s GPIO lines are accessible on the board, including seven than can be used as PWM outputs and twelve that can be used as analog inputs. The ATmega32U4 is capable of native full-speed USB, which makes it more versatile than similar boards that rely on USB-to-serial adapters: in addition to supporting a virtual (CDC) serial/COM port interface, the A-Star can appear to a connected computer as a mouse and keyboard. The A-Star’s USB interface can be accessed through its USB Micro-B connector.
The A* Prime supports the on-board microcontroller with many additional features and improvements over competing products, including enhanced connectivity and superior power management. The Prime is available in two main versions: LV, which features a blue solder mask and a step-up/step-down voltage regulator that allows operation from 2.7 V to 11.8 V, and SV, which features a green solder mask and a switching step-down regulator that allows operation from 5 V to 36 V. Each version is available in several different configurations: with or without preinstalled through-hole components like standard Arduino female headers and with or without microSD support. There is also a configuration available for each version with an 8×2 character LCD.
This configuration of the A-Star 32U4 Prime LV does not offer microSD support and is assembled with through-hole components as shown in the picture above so that all the basic features can be used without any additional soldering. The standard female headers common to many Arduinos are preinstalled, as is the 2×3 male ISP header, buzzer, DC power jack, and shorting block headers for enabling the buzzer and battery voltage monitor. This is the LV version of the A-Star Prime, which operates from 2.7 V to 11.8 V.
This product requires a USB A to Micro-B cable (not included) to connect to a computer.