Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores...
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores...
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also...
A circuit board compatible with Arduino Leonardo equipped with Atmega32U4 microcontroller, SD card reader and step-up / step-down converter. Polol 4008
ID: 574758
Availability date:
Microcontroller | ATmega32u4 |
Core | AVR |
Frequency | 16MHz |
Flash memory | 32kB |
RAM | 2,5kB |
EEPROM memory | 1kB |
Number of digital pins | 26 |
Number of PWM channels | 7 |
Ilość wejść analogowych | 12 |
ADC | 1x 10bit |
DAC | none |
CAN | none |
USB | 1 |
Ethernet | none |
WiFi/BT module | No |
Bluetooth module | No |
GSM/GPRS module | Nie |
Logic voltage | 5 V |
MicroSD slot | Yes |
Supply voltage min | 2 V |
Supply voltages max | 16 V |
A-Star Prime LV is a development kit compatible with Arduino Leonardo. The platform is based on the Atmega32U4 microcontroller, with 32 kB flash memory, 2.5 kB SRAM and 1kB EEPROM. The system used supports the USB interface, so you do not need a programmer to use the board. A-star is equipped with 26 ports, of which 7 ports support PWM modulation, and 12 are analog. There are as many as 43 GND pins on the board, which makes it easier to connect peripherals. The built-in step-up / step-down converter allows you to supply the system with a voltage from 2 V to 16 V. The PCB also has an SD card reader, a buzzer and a connector to connect the LCD display with the HD44780 driver.