Qwiic Thing Plus - development kit with ATSAMD51J20 microcontroller
ID: 581511
zł149.05
Tax included
zł121.18 tax excl.
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. The chip can be clocked at 120 MHz, has a built-in 1 MB Flash memory and 256 KB SRAM. There are 6 SERCOM interfaces on the board. In addition, the module has 4 Mb of additional Flash memory, a JST-PH connector and a LiPo battery charger, thanks to which the set can become a portable device.
The microcontroller has a UF2 bootloader and is programmed via a microUSB connector. The kit has a Qwiic connector and a 3.3 V stabilizer. It can be programmed using the Arduino IDE. The guide and examples of use are available on the product page.
Features
- ATSAMD51J20 microcontroller
- 32-bit ARM Cortex-M4F MCU
- Up to 120MHz CPU speed
- 1MB flash memory
- 256KB SRAM
- Up to 6 SERCOM interfaces
- UF2 bootloader
- Qwiic connector
- USB interface for programming and power
- 600mA 3.3V regulator
- 4Mb (external) flash memory
- LiPo charger
- Feather pin layout
581511
Data sheet
- Microcontroller
- ATSAMD51
- Core
- Cortex-M4
- Frequency
- 120MHz
- Flash memory
- 1024kB
- RAM
- 256kB
- EEPROM memory
- none
- Number of digital pins
- 15
- Number of PWM channels
- 15
- Ilość wejść analogowych
- 6
- ADC
- 1x 12bit
- DAC
- 1x 10bit
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 3,3 V
- MicroSD slot
- No
- Supply voltage min
- 2,5 V
- Supply voltages max
- 6 V
You might also like
No product available!
No product available!
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł4.06
24h
Available quantity: 44
Available
Other products in the same category (16)
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! PJRC TEENSY32
zł159.08
Delivery date unknown
No product available!
SparkFun MicroView is a board with an ATmega328P microcontroller from the AVR family and an OLED 64 x 48 pixel display. DEV-12923
zł237.80
4 weeks
No product available!
Board with the ATmega328 microcontroller from the AVR family, there are 20 I/O lines, 6 PWM channels, 6 analog inputs at the user\'s disposal. SparkFun DEV-15123
zł109.30
24h
Available quantity: 1
Available
The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4. Not only is it small and LiPo-ready, it’s a very capable XBee-ready development board. DEV-11520
zł212.57
24h
Available quantity: 1
Available
Evaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Arduino Mega kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun DEV-15442
zł154.64
24h
Available quantity: 1
Available
No product available!
Available
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE
zł191.67
24h
Available quantity: 19
Available
Base board compatible with Arduino. It was equipped with an Atmega 328P microcontroller. It has 14 I/O lines (including 6 PWM channels) and 6 analog inputs. SparkFun DEV-14525
zł128.77
24h
Available quantity: 1
Available
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
zł195.93
24h
Available quantity: 14
Available
Base board compatible with Arduino. It was equipped with the ATSAMD21G18 microcontroller. It has 26 I/O lines and 14 analog inputs. SparkFun DEV-14812
zł171.87
4 weeks
No product available!
Base board compatible with Arduino. It was equipped with an ATmega328P microcontroller. It has 22 I / O lines (including 6 PWM channels) and 8 analog inputs and a Qwiic connector. SparkFun DEV-18158
zł122.00
24h
Available quantity: 2
Available
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. Himax HM01B0 camera included. SparkFun KIT-17071
zł281.13
24h
Available quantity: 1
Available
The SparkFun AST-CAN485 board is a miniature Arduino in a compact Pro Mini housing with a built-in CAN (Control Area Network) and RS485 ports. Sparkfun DEV-14483
zł315.22
24h
Available quantity: 1
Available
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56
24h
Available quantity: 1
Available
A development board compatible with the Arduino Pro Mini. It is equipped with an ATSAMD21G18 microcontroller. It has 22 I/O lines and 14 analogue inputs. SparkFun DEV-13664
zł119.00
6 weeks
No product available!
Development kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713