Jrk G2 18v27 - DC motor controller
ID: 571451
zł767.41
Tax included
zł623.91 tax excl.
DC motor driver with voltage 6.5..30V and maximum continuous current 27A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3148
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Jrk G2 18v27 USB Motor Controller is a single-channel DC motor driver. The voltage supplying the motors is from 6.5 to 30 V (recommended maximum voltage 34 V). The control can be carried out via the USB port, TTL serial interface, I2C, RC receiver signal or via analog input. The controller enables easy implementation of a closed loop of engine speed control by connecting an analog or frequency input. It also allows configuration of engine operation parameters via a USB interface and a free application.
properties
- Operating voltage: 6.5 ... 30 V (absolute maximum, 30 V maximum recommended)
- Continuous output current: 27 A
- Simple bi-directional DC motor control
- Automatic reverse polarity protection
- Five control interfaces
- USB interface - Virtual COM port (microUSB connector)
- Serial TTL (UART) interface
- I2C interface
- Signal from RC apparatus (PWM 50 Hz, 5-10% filling)
- Analogue signal input
- Feedback
- Analog signal (0 - 5 V)
- Frequency for closed loop speed control using pulse counting (in the case of high frequency feedback) or pulse clocking (in the case of low frequency feedback)
- Configuration via USB interface
- PID coefficients (tuning parameters)
- Maximum current
- Maximum working cycle
- Maximum acceleration and delay
- Error response
- Input calibration (learning) for analog and RC control
- Dimensions: 30.5 x 43 x 10.5 mm
- Weight: 10 g
Included
- Driver Jrk G2 18v27 USB Motor Controller
- 2 x 2-pin screw connector
- Simple male goldpin connector
571451
Data sheet
- Output current
- 27 A
- Number of channels
- 1
- Supply voltage min
- 6,5 V
- Supply voltages max
- 24 V
You might also like
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).
zł583.28
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5 ... 40V and maximum continuous current 13A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3147
zł597.20
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5..40V and maximum continuous current 21A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3149
zł933.32
24h
Available quantity: 1
Available
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143
zł299.62
Delivery date unknown
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142
zł292.36
24h
Available quantity: 1
Available
Other products in the same category (16)
A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with soldered connectors. Pololu 5066
zł114.30
6 weeks
No product available!
Pololu TReX Dual Motor Controller DMC01
zł1,124.93
24h
Available quantity: 1
Available
The X-NUCLEO-IHM12A1 is a low voltage dual brush DC motor driver expansion board based on the STSPIN240 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys
zł56.25
24h
Available quantity: 2
Available
Pololu Low-Voltage Dual Serial Motor Controller
zł169.17
24h
Available quantity: 1
Available
Single-channel DC motor controller enabling motor control with voltage in the range of 7-30V and current up to 10A. The set has a potentiometer and a direction switch. Cytron MD10_POT
zł51.91
24h
Available quantity: 42
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5057
zł696.22
6 weeks
No product available!
Dual motor controller allowing two DC motors to be driven with voltages from 4.5 to 13.5V and a continuous current of 1.2 A per channel. SparkFun ROB-14451
zł69.90
24h
Available quantity: 3
Available
The DC motor driver module enables the motor to be controlled using a PWM signal with several supply voltages (3V, 6V, 12V, 24V and 35V) and a maximum continuous current of 5A.
zł7.90
24h
Available quantity: 40
Available
Pololu High-Power Motor Driver 24v20
zł236.02
24h
Available quantity: 1
Available
Pololu High-Power Motor Driver 18v15
zł258.30
6 weeks
No product available!
This Kit with fully-dedicated PWM driver chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors; you can also connect any other I2C devices or shields to the same pins. This makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Adafruit 1438
zł116.17
4 weeks
No product available!
Module with a driver designed for small DC motors. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020084
zł7.49
6 weeks
No product available!
Single-channel DC motor controller that allows the motor to be controlled with a voltage range of 6-30V and a current of up to 13A. Allows engine speed control using PWM signals. Cytron MD13S
zł59.90
24h
Available quantity: 49
Available
No product available!
DC motor driver with an operating voltage from 6 to 60 V and a maximum continuous current of 300 A. It can communicate via USB, UART, RC or analog signal and allows for the implementation of a feedback loop. Pololu 3584
zł2,579.85
6 weeks
No product available!
The RoboClaw Solo motor controllers from Basicmicro (formerly Ion Motion Control) can control a single brushed DC motor using USB serial, TTL serial, RC, or analog inputs. An integrated quadrature decoder make it easy to create a closed-loop speed control system.
zł558.35
24h
Available quantity: 3
Available
DC motor driver with voltage 6.5..30V and maximum continuous current 27A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3148