Development board D1 Mini Pro WIFI ESP8266
ID: 575263
zł35.40
Tax included
zł28.78 tax excl.
Development board D1 Mini Pro with WiFi ESP8266 module and 16 MB Flash memory, equipped with ceramic antenna and external antenna connector. The module can be programmed from the Arduino IDE level. WeMos D1 Mini Pro
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The development board allows you to integrate Wi-Fi module (ESP8266), known for its simplicity of use and considerable capabilities in projects requiring network access, eg within IoT. The module has 11 digital I / O pins with interrupt, PWM, I2C and 1-Wire. There is also one analog input (input 3.2 V max). An external antenna connector is located on the board. The module is programmed through the microUSB connector. The board is compatible with Arduino , MicroPython and NodeMCU .
Attention!
The maximum allowed voltage on the lines of the ESP8266 system is 3.3 V. Make sure that the additional module attached to the board does not force the lines of the ESP8266 voltage higher than allowed.
properties
- ESP8266 microcontroller
- The frequency of the 80 MHz / 160 MHz clock
- Flash memory 16 MB bytes
- Operating voltage 3.3 V
- 11 digital I / O pins
- MicroUSB socket
- Reset button
- Pins of analog input 1 (max. Input: 3.2 V)
- Converter UART <> USB - CP2104
- Dimensions: 34.2 x 25.6mm
- Weight: 2.5 g
Included
- WeMos D1 Mini Pro module
- 2 x male goldpin connector
- 2 x female goldpin connector short
- 2 x long female goldpin connector
575263
You might also like
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł20.02
24h
Available quantity: 64
Available
BMP180 temperature / pressure sensor module compatible with WeMos D1 mini board.
zł6.40
24h
Available quantity: 23
Available
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł22.69
Delivery date unknown
No product available!
Relay module for the WeMos D1 Mini WiFi set
zł4.86
Delivery date unknown
No product available!
RTC DS1307 real-time clock module and MicroSD card slot for the WeMos D1 Mini.
zł13.62
24h
Available quantity: 5
Available
Development board D1 Mini V3 with WiFi module ESP-8266 and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini V3.x
zł18.91
Delivery date unknown
No product available!
Other products in the same category (16)
WiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.
zł90.87
24h
Available quantity: 5
Available
Development board ESP8266 with WiFi module; WRL-13231
zł127.80
24h
Available quantity: 5
Available
WiFi module based on ESP8266. The module has a built-in antenna and USB-UART converter. The module can be programmed in Lua (under the control of the NodeMCU firmware) or in the Arduino environment. 10 GPIO lines are available which each can be configured to work as PWM, I2C.
zł32.69
24h
Available quantity: 21
Available
E-Paper ESP8266 Driver Board is a universal driver board for e-Paper displays. The board is based on the WiFi ESP8266 module. e-Paper ESP8266 Driver Board
zł57.81
24h
Available quantity: 3
Available
WiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50
24h
Available quantity: 3
Available
A set with environmental sensors that allows you to measure air pollution and noise and visualize data on a dedicated platform. Seeed Studio 102110258
zł869.67
6 weeks
No product available!
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł20.02
24h
Available quantity: 65
Available
Development board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186
zł89.40
24h
Available quantity: 2
Available
Plate for applications in the area of Internet of Things (IoT). The module was based on the ESP8266 system, which integrates WiFi, TCP / IP communication, 32-bit MCU, 10-bit ADC and many interfaces such as HSPI, UART, PWM, I2C and I2S. DFrobot DFR0489
zł43.25
24h
Available quantity: 1
Available
WiFI 802.11 b/g/n module. Equipment includes, among others: LED diode, antenna, 8 pins with 2.54mm pitch (including 3 GPIO lines). Power supply: 3.3V.
zł10.96
6 weeks
No product available!
ESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082
zł87.55
4 weeks
No product available!
WiFi 802.11 b/g/n module with ESP8266 chip, there are 8 pins with UART and GPIO interface. Built-in PCB antenna. SparkFun WRL-17146
zł50.02
24h
Available quantity: 3
Available
WiFi module with ESP8266 designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-ESP8266
zł41.62
24h
Available quantity: 7
Available
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
zł25.90
24h
Available quantity: 4
Available
WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S
zł10.58
24h
Available quantity: 10
Available
Development board with the ESP-WROOM-02 WiFi module. The board has a USB-UART converter, a basket for a Li-Ion 18650 battery and a charging circuit
zł33.49
6 weeks
No product available!
Development board D1 Mini Pro with WiFi ESP8266 module and 16 MB Flash memory, equipped with ceramic antenna and external antenna connector. The module can be programmed from the Arduino IDE level. WeMos D1 Mini Pro