- Out-of-Stock
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color
ID: 569473
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi 2B/3B/Zero/Zero W
- Onboard 4x Keys
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 85mm × 56mm
- Display size: 57.288mm × 38.192mm
- Dot pitch: 0.217 × 0.217
- Resolution: 264 × 176
- Display color: red, black, white
- Grey level: 2
- Full refresh time: 15s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interface
| SYMBOL | DESCRIPTION |
|---|---|
| VCC | 3.3V |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output, low active |
Selection Guide
| Part Number | Colors | Grey Level | Resolution | Display size (mm) | Outline Dimension (mm) | Full Refresh Time (s) | Partial Refresh Time (s) | Interface | Pi Header1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.54inch e-Paper Module | black, white | 2 | 200x200 | 27.60 × 27.60 | 48.0 × 33.0 | 2 | 0.3 | SPI | × |
| 1.54inch e-Paper Module (B) | red, black, white | 2 | 200x200 | 27.60 × 27.60 | 48.0 × 33.0 | 8 | N/A | SPI | × |
| 1.54inch e-Paper Module (C) | yellow, black, white | 2 | 152x152 | 27.51 × 27.51 | 48.0 × 33.0 | 27 | N/A | SPI | × |
| 2.13inch e-Paper HAT | black, white | 2 | 250x122 | 48.55 × 23.71 | 65.0 × 30.2 | 2 | 0.3 | SPI | √ |
| 2.13inch e-Paper HAT (B) | red, black, white | 2 | 212x104 | 48.55 × 23.71 | 65.0 × 30.2 | 15 | N/A | SPI | √ |
| 2.13inch e-Paper HAT (C) | yellow, black, white | 2 | 212x104 | 48.55 × 23.71 | 65.0 × 30.2 | 15 | N/A | SPI | √ |
| 2.7inch e-Paper HAT | black, white | 2 | 264x176 | 57.29 × 38.19 | 85.0 × 56.0 | 6 | N/A | SPI | √ |
| 2.7inch e-Paper HAT (B) | red, black, white | 2 | 264x176 | 57.29 × 38.19 | 85.0 × 56.0 | 15 | N/A | SPI | √ |
| 2.9inch e-Paper Module | black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 2 | 0.3 | SPI | × |
| 2.9inch e-Paper Module (B) | red, black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 15 | N/A | SPI | × |
| 2.9inch e-Paper Module (C) | yellow, black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 15 | N/A | SPI | × |
| 4.2inch e-Paper Module | black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 4 | N/A | SPI | × |
| 4.2inch e-Paper Module (B) | red, black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 15 | N/A | SPI | × |
| 4.2inch e-Paper Module (C) | yellow, black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 15 | N/A | SPI | × |
| 4.3inch e-Paper UART Module | black, white | 4 | 800x600 | 88.00 × 66.00 | 118.0 × 75.0 | 1.5 | N/A | UART | × |
| 7.5inch e-Paper HAT | black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 6 | N/A | SPI | √ |
| 7.5inch e-Paper HAT (B) | red, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI | √ |
| 7.5inch e-Paper HAT (C) | yellow, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI | √ |
- Standard Raspberry Pi header on module, allowed to be attached onto Pi directly, compatible with Raspberry Pi 2B/3B/Zero/Zero W
Package content
Weight: 0.036 kg
- 2.7inch e-Paper HAT (B) x1
- RPi screws pack (2pcs) x2
- PH2.0 20cm 8Pin x1
569473
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,7
- Resolution
- 264 x 176 px
- Interface
- SPI
- Touch
- No
You might also like
E-Ink display module with a resolution of 400x300 pixels and a diagonal of 4.2 inches. The display has a built-in controller, communication takes place via the SPI interface. Waveshare 4.2inch e-Paper Module
zł159.00
24h
Available quantity: 2
Available
Available
264x176, 2.7inch E-Ink raw display, three-color, SPI interface, without PCB
zł57.29
24h
Available quantity: 1
Available
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł185.00
Delivery date unknown
No product available!
Other products in the same category (16)
Bodhilabs VPack5.0V 1-AA Battery Holder w/ 5V Regulator
Retired
No product available!
The TRACER DeLuxe USB keyboard is a classic keyboard, but very carefully made. The high quality of the material used for production goes hand in hand with the interesting design of this keyboard. 1.2 m cable with USB terminal
Retired
No product available!
Janusz A. Dobrowolski
Delivery date unknown
No product available!
Wires with Pre-crimped Terminals 10-Piece Rainbow Assortment F-F 60"
Retired
No product available!
No product available!
No product available!
The SanDisk Ultra microSDHC 32GB 100MB/s C10 memory card is an efficient and reliable high-capacity storage medium, offering fast data transfer, compatibility with various devices and resistance to harsh conditions, ideal for smartphones, tablets, sports cameras or drones. SanDisk SDSQUNR-032G-GN3MN
Retired
No product available!
No product available!
Neodymium rectangular magnet with dimensions of 10x5mm a and a height of 2 mm.
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Yellow
Retired
No product available!
No product available!
No product available!
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface