Order and pay in
for same day shipping
16-channel logic analyzer with a sampling frequency of 200 MHz. It can...
Scissors for electricians.
YATO YT-81500 19mm cable harness tape. The tape is intended for...
Black PVC electrical insulating tape, dimensions: 15mm x 20m x 0.13mm.
Set of 10 pieces of PVC electrical insulating tapes with dimensions of...
Voltage tester in the range of 12 - 250 V. The indicator is intended for...
Insulated Phillips screwdriver YT-28245
The OWI-535 Robotic Arm Edge Kit is a remote-controlled robotic arm kit with five degrees of freedom, a 3.5oz (100g) lifting capacity, and an LED light. Using five motors with gearboxes, the Edge has a 120° wrist motion, a 300° elbow motion, a 180° shoulder motion, a 270° base motion, and a 0-1.77" (0-4.5cm) gripping motion.
OWI’s second-generation robotic arm kit, the Robotic Arm Edge, teaches the basic mechanics and electronics of robot arm construction and control. Using five motors with gearboxes, the Edge has five degrees of freedom: a 120° wrist motion, a 300° elbow motion, a 180° shoulder motion, a 270° base motion, and a 0-1.77" (0-4.5cm) gripping motion. When one of the gearboxes encounters excessive resistance to motion, the gearbox will make a noise that alerts you to stop the arm’s motion in that direction. Illuminating whatever the gripper is holding, a white LED is mounted to the “hand” of the arm.
An illustrated manual guides you through assembly, which requires only a Phillips screwdriver, long-nose pliers and diagonal cutters; no soldering is required.
The Robotic Arm Edge is a kit; assembly is required. Four ‘D’ batteries are required but not included.
|OWI-535 Robotic Arm Edge kit parts.|
|Tamiya 70172 Universal Plate L (210x160mm)|