Grove CO2 and Temperature & Humidity Sensor - module with SCD30 sensor
ID: 583161
zł329.62
Tax included
zł267.98 tax excl.
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. It is characterized by a wide measurement range of CO2 from 0 to 10,000 ppm and high measurement accuracy. The sensor uses the NDIR (Non-Dispersive Infrared) technology based on an infrared light source and a set of filters and detectors that detect the wavelength corresponding to the measured quantities. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. It can be used, for example, in projects of weather stations. Full documentation with examples of use is available on the product page.
Features
- CO2 measuring range: 0 to 10,000 ppm
- CO2 measurement accuracy: ± (30 ppm + 3%)
- Sensor in NDIR technology
- Humidity measurement: 0 to 100% RH
- Temperature measurement: -40°C to 70°C
- High measurement stability
- I2C interface
- Supply voltage: 3.3 V or 5 V
- Dimensions: 60 x 40 mm
583161
Data sheet
- Interface
- I2C
- Type of sensor
- inny
- Power supply voltage
- 3,3 - 5 V
- Concentration measurement
- CO2
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 70
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł209.00
24h
Available quantity: 69
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 20
Available
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
zł28.82
24h
Available quantity: 3
Available
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
zł120.68
24h
Available quantity: 2
Available
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł55.78
24h
Available quantity: 2
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł54.85
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with LCD display 16x2 characters with RGB backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104030001
zł99.68
6 weeks
No product available!
Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005
zł91.65
24h
Available quantity: 2
Available
4-core cable with a length of 15 cm, terminated on one end with a Grove plug, and on the other with a male goldpin connector. Seeed Studio 110990210
zł9.62
24h
Available quantity: 9
Available
Kit with MPX5700AP pressure sensor, syringe and tube. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020248
zł199.74
6 weeks
No product available!
Yellow mounting for Grove modules, which ensure convenient installation and replacement of modules in the project. Compatible with LEGO. Set of 4. Seeed Studio 110070025
zł11.54
24h
Available quantity: 1
Available
Grove starter kit dedicated to Raspberry Pi minicomputers. Contains basic sensors and modules necessary for learning programming and electronics. Seeed Studio 110020169
zł261.47
24h
Available quantity: 1
Available
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł41.02
6 weeks
No product available!
UART-RS232 converter module. The board was equipped with a Grove and DB9 connector. Seeed Studio 103020192
zł43.95
6 weeks
No product available!
Module with a reed relay BR-500Ω with a load up to 0.5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020014
zł24.90
6 weeks
No product available!
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020121
zł24.06
24h
Available quantity: 3
Available
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
zł41.98
24h
Available quantity: 4
Available
Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010
zł65.28
24h
Available quantity: 1
Available
A 4-core cable with a length of 50 cm, both terminated with a Grove plug. Seeed Studio 110990038
zł17.13
Delivery date unknown
No product available!
Power supply module with a 650 mAh battery for the Wio Terminal set. Seeed Studio 103990564
zł137.46
24h
Available quantity: 3
Available
Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009
zł13.16
24h
Available quantity: 3
Available
Module with a 16-channel PWM PCA9685 driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020102
zł89.49
24h
Available quantity: 1
Available
Module with Sensirion SCD30 sensor, which enables CO2, temperature and humidity measurement. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020634