Waveshare LED matrix RGB WS2812B 8 x 4 for Raspberry Pi
ID: 569512
zł44.55
Tax included
zł36.22 tax excl.
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
RGB LED matrix module (WS2812B) 8 x 4 diodes for Raspberry Pi. This extension is connected directly to the GPIO Raspberry Pi connector. Communication takes place using only one signal pin. The diodes are connected in series. The signal pin can be disconnected from the GPIO connector by means of a jumper in the form of a soldered resistor 0R. Python's service examples and the WEB interface have been made available to the module.
properties
- Number of LEDs: 32 (8 x 4)
- Brightness: 256 levels adjusted
- Color depth: 24-bit true color (8-bit for R / G / B respectively, 256 x 256 x 256 total = 16777216 colors)
- Data transfer speed: 800 Kbps (typical)
- Power supply: 5 V
- Diameter of mounting holes: 3 mm
- Dimensions: 65 × 30.2 mm
Included
- RGB LED matrix module (WS2812B) 8 x 4 LEDs for Raspberry Pi
- Spacers with screws and nuts for attaching the cover to the Raspberry Pi computer
569512
You might also like
This RGB LED HAT can be easily attached on top of the Raspberry Pi to display colorful effect, and controlled by only one signal pin.
zł50.43
24h
Available quantity: 4
Available
Other products in the same category (16)
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °
zł28.02
24h
Available quantity: 10
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
zł24.99
24h
Available quantity: 8
Available
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: YELLOW. Adafruit 2948
zł40.98
4 weeks
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM334
zł76.21
24h
Available quantity: 2
Available
LED matrix display module (in red color) with an organization of 14 columns x 9 lines, compatible with Arduino.
zł79.00
24h
Available quantity: 2
Available
R20103UYW - Backlight 20x10mm, 8 LED ultra yellow, light intensity 20 mcd (10mA) (2.0V), df 591nm, TOA-L12ZMY-N
zł3.38
6 weeks
No product available!
Adafruit 2226
zł35.09
24h
Available quantity: 2
Available
Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461
zł262.32
4 weeks
No product available!
Module with 6 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM187
zł144.78
24h
Available quantity: 1
Available
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812
zł29.85
6 weeks
No product available!
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: RED. Adafruit 2947
zł42.35
4 weeks
No product available!
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °
zł35.34
24h
Available quantity: 1
Available
Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
zł5.71
24h
Available quantity: 93
Available
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
zł22.24
24h
Available quantity: 2
Available
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812B
zł24.29
24h
Available quantity: 6
Available
Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED
zł73.42
24h
Available quantity: 1
Available
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT