Qwiic Quad Solid State Relay Kit - module with four relays
ID: 580590
zł270.93
Tax included
zł220.27 tax excl.
Module with 4 relays controlled by the I2C interface. Each relay can switch currents up to 40 A at 28-380 V AC. SparkFun KIT-16833
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with relays controlled by the I2C interface. The board allows you to place up to four relays. Due to the fact that the module is based on the ATTiny84 microcontroller, they can be controlled via the I2C interface. ATTiny84 is pre-programmed. The I2C ATTiny84 address is software configurable. Each relay can switch currents up to 40 A at 28-380 V AC.
The kit does not require soldering. In order to connect the relays to the board and AC load, it is necessary to screw the relays and connect the wires.
Arduino libraries are available for the module.
Attention!
The black standoffs and 4-40 screws used to secure them shown in some of the photos are not included with the kit.Features
- Power supply: 2.5 to 3.6 V (3.3 V recommended)
- I2C address: 0x08 (default), 0x09
- Relay SSR40DA:
- Maximum current: 40 A.
- Output voltage: 24 - 380 VAC
- Low EMI / EFI
- Low inrush current of 7.5 mA / 12 V
- 2.5 kV insulation
- Zero Cross Trigger
- Normally open circuit
Kit contains
- Qwiic Quad Solid State PCB
- 4 x semiconductor relays - 40 A (input 3-32 V DC)
- 8 x Nut
- 8 x Screw
- 22 AWG connecting wire (red)
- 22 AWG connecting wire (black)
580590
Data sheet
- Output current
- 40 A
- Number of channels
- 4
- Executive element
- SSR
You might also like
No product available!
No product available!
Available
Available
Other products in the same category (16)
Industrial module with 4 relays with a load of up to 10 A. It uses the Modbus RTU protocol and the RS485 or RS232 communication interface. DFRobot FIT0827
zł155.02
24h
Available quantity: 1
Available
Module with 4 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC40001-DC
zł471.09
6 weeks
No product available!
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
zł92.90
24h
Available quantity: 1
Available
6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802
zł92.90
Delivery date unknown
No product available!
4-channel switch module with a maximum voltage of 16 V and a current of 2 A based on a MOSFET transistor. It is controlled by digital inputs. It is equipped with a screw connection and status LEDs. Adafruit 5757
zł72.90
24h
Available quantity: 3
Available
Module with 32 12 V relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL320001
zł941.76
24h
Available quantity: 1
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
zł54.53
24h
Available quantity: 2
Available
Module with a 12 V relay and a timer. It allows you to turn the device on and off cyclically at a specified time using potentiometers. It can also operate in single trigger mode, which allows the device to be turned on after a signal has been applied for a specified period of time. The operating time can be adjusted from 1 s to 100 s or from 1 s to 15 min
zł15.06
24h
Available quantity: 79
Available
8 Channel Ethernet Solid State Relay Module - module with 8 SSR DC relays and Ethernet communication
Module with 8 SSR relays with a load of up to 3 A. The board communicates via the Ethernet interface. Numato Lab 8ETHSSR001-DC
zł1,031.69
6 weeks
No product available!
4-channel SSR 240V / 2A relay module with fuse. modSSR-4CH
zł30.50
24h
Available quantity: 11
Available
Module with a reed relay BR-500Ω with a load up to 0.5 A. The board is equipped with a Grove connector and is controlled by a digital input. Seeed Studio 103020014
zł24.90
6 weeks
No product available!
Module with 32 relays 12 V with a maximum switching current of 7 A. Numato Lab RL320003
zł333.40
6 weeks
No product available!
The module is dedicated to home automation based on the Raspberry Pi. It allows you to control two devices 250VAC/7A or 30VDC/10A, providing isolation with an optocoupler. SB Components 21932
zł92.39
24h
Available quantity: 1
Available
Your 5V system can wield great power with this big, beefy relay board. Kit contains all the parts you need to get your high-power load under control. Sparkfun KIT-13815
zł52.71
24h
Available quantity: 1
Available
ModRL01 module with 10A/250VAC (10A/24VDC) relay, supply of 5 V load relay coil, additional control circuit, protected overvoltage control
zł5.87
24h
Available quantity: 69
Available
Module with 4 relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL40001
zł258.78
24h
Available quantity: 2
Available
Module with 4 relays controlled by the I2C interface. Each relay can switch currents up to 40 A at 28-380 V AC. SparkFun KIT-16833