Categories

Kamami.pl - Official Raspberry Pi distributor

New products



Arducam Pico4ML TinyML Dev Kit - development kit with RP2040 microcontroller and Bluetooth 5.0

Development kit with RP2040 microcontroller, Bluetooth 5.0 module, QVGA camera, LCD display, IMU chip and microphone. ArduCAM B0330

More details

ID: 586613

61,66€ gross (23% VAT)
50,13€ net

Add to wishlist

More info

Description

Development kit with the RP2040 microcontroller, which is equipped with two ARM Cortex-M0 + cores operating at 133 MHz and 264 kB RAM. The board also has a QVGA camera with a resolution of 320 x 240 at 60 fps, an LCD display, an IMU chip and a microphone, and wireless communication is provided by a Bluetooth 5.0 module.

The board's equipment makes the set a perfect test platform for projects using artificial neural networks to process sounds, images or motion. The platform supports the popular MicroPython and C / C ++ programming languages. Programs can be uploaded to memory via the USB interface in mass storage mode.

Features

  • RP2040 microcontroller:
    • Two ARM Cortex-M0 + cores clocked up to 133 MHz
    • External flash memory: 2 MB
    • SRAM memory: 264 kB
    • USB 1.1 running in Host and Device modes
    • Support low power mode and idle mode
    • Drag & Drop programming possible in USB mass storage mode
    • 26 x GPIO pins
    • Extensive communication interfaces:
      • 2 x SPI
      • 2 x I2C
      • 2 x UART
      • 3 x 12-bit ADC
      • 16 PWM channels
    • Built-in real time clock (RTC)
    • Accelerator for floating point numbers
    • Temperature sensor
    • Supply voltage: 1.8 - 5.5 V
    • Working temperature: -20 ° C to 85 ° C (recommended maximum temperature 70 ° C)
  • IMU ICM-20948:
    • 3-axis gyro, 3-axis accelerometer, 3-axis compass and Digital Motion Processor ™ (DMPTM)
    • DMP offloads the host CPU from the computation of traffic processing algorithms, improving system performance
    • FSYNC EIS Support
    • 3-axis gyroscope with programmable FSR ± 250 dps, ± 500 dps, ± 1000 dps and ± 2000 dps
    • 3-axis accelerometer with programmable FSR ± 2g, ± 4g, ± 8g and ± 16g
    • 3-axis compass with a wide range up to ± 4900 μT
    • Embedded Digital Motion Processor (DMP)
    • Auxiliary I2C interface for external sensors
    • 16-bit ADCs and programmable filters
    • 7 MHz SPI or 400 kHz I²C fast mode
    • Temperature sensor with digital output
    • VDD working range from 1.71V to 3.6V
  • Bluetooth module:
    • Bluetooth 5.0
    • 40 KB RAM + 8 KB Cache + 4 MB Flash
    • Transmitter power: + 5dBm
    • Input voltage: 1.8 to 3.6V
    • 2 x TWI / I2C, 3 x UART, 3 x SPI, 5 x PWM
    • Supported Platform: Zephyr RTOS
    • Software update by UART0, SWD, OTA
    • Mono Sigma Delta Voice ADC, 16 bit; 16 KHz sampling rate; SNR (A-weighted): 83 dB
    • Configurable High Pass Filter with ADC
    • Supports mono DMIC IN, DMIC clock up to 3MHz;
    • I2S Tx: standard I2S, supports both master and slave mode, sampling rate up to 44.1KHz / 48KHz
    • I2S Rx: standard I2S and TDM4 mode, supports both main mode and slave mode, sampling rate up to 44.1KHz / 48KHz.
    • Dimensions: 18 x 15 mm with antenna, 15 x 13 mm without antenna.
  • Camera module: HiMax HM01B0, up to QVGA (320 x 240 at 60 fps)
  • PCM microphone, 20 bit, 16 kHz sampling
  • Screen: 0.96 inch SPI LCD (160 x 80, ST7735)
  • Working voltage: 3.3V
  • Input voltage: VBUS: 5V +/- 10%, VSYS Max: 5.5V
  • Dimensions: 51 x 21 mm

Kit contains

  • Arducam Pico4ML Dev Board
  • microUSB cable

Downloads

Manufacturer

Accessories