CR2016 lithium battery with 3V voltage and 90mAh capacity. Includes 5...
CR2016 lithium battery with 3V voltage and 75mAh capacity. Includes 5...
CR2025 lithium battery with 3V voltage and 220mAh capacity. Includes 5...
CR2025 lithium battery with 3V voltage and 150mAh capacity. Kinetic CR2025
CR123A lithium battery with 3V voltage and 1400mAh capacity. GP CR123A
GP1604A/6LF22/6LR61/MN1604 alkaline battery with a voltage of 9V. GP 1604A
6F22 alkaline battery with a voltage of 9V and a capacity of 550mAh....
GP 11A alkaline battery with a voltage of 6V. Includes 5 pcs. GP 11A
The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. DEV-13321
|Number of digital pins||8|
|Number of PWM channels||8|
|Ilość wejść analogowych||6|
|Logic voltage||3,3 V|
|Supply voltage min||4,5 V|
|Supply voltages max||15 V|
SparkFun Photon RedBoard, DEV-13321
The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It’s easy to use, it’s powerful, and it’s connected to the cloud. With the best support, potential, and performance the Photon RedBoard provides you with an IoT device with a powerful 120Mhz ARM Cortex M3 and built-in WiFi connectivity. Imagine blowing up a Photon into the shape of an Arduino and while keeping its wireless and ARM Cortex M3 capabilities, the result is this board!
The SparkFun Photon RedBoard has been based around the P1 Spark Module. Each P1 comes pre-loaded with Spark OS firmware and includes their basic cloud service. With a built-in antenna and a uFL connector, the P1 makes it so you don’t have to stress over the optimization of RF designs.
The Photon RedBoard has all of the hardware peripherals you know and love: 8 Digital I/O pins, 6 Analog Inputs, UART, SPI and ARM JTAG hook-ups. We’ve also broken out the SDA, SCL, SCK, MISO, MOSI, SS, DAC, and WKP pins as well. You can power the Photon RedBoard over USB or through the barrel jack. The on-board power regulator can handle anything from 4.5 to 15VDC.