Photon Weather Shield - expansion module with pressure, humidity and temperature sensor
ID: 558630
zł138.50
Tax included
zł112.60 tax excl.
Module with pressure, humidity and temperature sensor. It uses the I2C interface and allows the connection of additional wind sensors via the RJ11 connector. SparkFun DEV-13674
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with atmospheric sensors designed for IoT Particle Photon board. It uses Si7021 temperature and humidity sensors and MPL3115A2 barometric pressure sensors. The board is equipped with two RJ11 connectors (for optional connection of rain and wind sensors) and a 3-pin connector for connecting a soil temperature and moisture sensor. The module is supplied with voltage through the pins of the Photon module or through the supply pins (no soldered connector) with voltage up to 12 V. The sensors communicate with the main module via the I2C interface. Full documentation with the guide is available on the product page.
Features
- Si7021 humidity and temperature sensor:
- Humidity measurement range: 0 to 100% RH
- Temperature measuring range: –40 to 125 ° C
- Precise relative humidity sensor: ± 3% RH (max), 0–80% RH
- High accuracy temperature sensor: ± 0.4 ° C, -10 to 85 ° C
- I2C communication
- Barometric pressure sensor MPL3115A2:
- Pressure: 20-bit resolution (Pa)
- Height: 20-bit resolution (meters)
- Temperature: 12-bit measurement (degrees Celsius)
- Programmable events
- Autonomous data acquisition
- FIFO buffer 32 samples
- I2C communication
- Connector compatible with Particle Photon
- Power supply: up to 12 V (via power pins) or USB 5 V (Photon module)
- Dimensions: 74 x 42 mm
558630
You might also like
Module with 9DoF LSM9DS1 sensor (3-axis accelerometer, 3-axis magnetometer, 3-axis gyroscope). It has a derived I2C interface and is supplied with the voltage of 3.3 V. SparkFun DEV-13629
zł135.50
24h
Available quantity: 4
Available
The power module is equipped with a LiPo battery charging system. It allows you to power the board with a battery and create a portable IoT device. SparkFun DEV-13626
zł82.87
24h
Available quantity: 1
Available
Prototype board designed to cooperate with Particle Photon. The board has prototype holes with a 2.54 mm pitch and pins of the I2C interface. SparkFun DEV-13598
zł13.76
24h
Available quantity: 3
Available
Other products in the same category (8)
Particle’s IoT (Internet of Things) hardware development kit, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chip in a tiny thumbnail-sized module called the PØ (P-Zero)
zł228.92
24h
Available quantity: 2
Available
Available
Module with 9DoF LSM9DS1 sensor (3-axis accelerometer, 3-axis magnetometer, 3-axis gyroscope). It has a derived I2C interface and is supplied with the voltage of 3.3 V. SparkFun DEV-13629
zł135.50
24h
Available quantity: 4
Available
Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. DEV-13628
zł126.27
24h
Available quantity: 2
Available
The power module is equipped with a LiPo battery charging system. It allows you to power the board with a battery and create a portable IoT device. SparkFun DEV-13626
zł82.87
24h
Available quantity: 1
Available
Prototype board designed to cooperate with Particle Photon. The board has prototype holes with a 2.54 mm pitch and pins of the I2C interface. SparkFun DEV-13598
zł13.76
24h
Available quantity: 3
Available
The board features bi-directional motor control using a TB6612 dual H-bridge, so it can control one stepper motor or two brushed DC motors with 4.5-13VDC power and about 1A current draw per motor. Adafruit 2653
zł196.21
24h
Available quantity: 1
Available
IoT development board the size of Arduino, equipped with an ARM Cortex-M3 processor (STM32F205) and a Wi-Fi communication module (with an integrated antenna and uFL connector). SparkFun DEV-13321
zł204.39
24h
Available quantity: 1
Available
Module with pressure, humidity and temperature sensor. It uses the I2C interface and allows the connection of additional wind sensors via the RJ11 connector. SparkFun DEV-13674