Maker Mini Sumo Controller - controller for Mini Sumo robots
ID: 587233
zł117.97
Tax included
zł95.91 tax excl.
A controller dedicated to Minisumo class robots. It is compatible with Arduino Uno and Arduino Nano boards. Cytron MAKER-MSUMO
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The controller is dedicated to Mini Sumo robots, compatible with Arduino Nano and Arduino Uno boards. It is a great solution for beginners who would like to start playing with sumo robots, but are not yet able to fully design the control electronics themselves. The module can power two DC motors with a current consumption of up to 3 A (continuous current). The user has the option of connecting numerous sensors necessary in robot fights, including enemy sensors, edge sensors, but also a starting module and a servo. The board has buttons that allow you to easily test the operation of the drives. The module is supplied with the voltage ranging from 7 to 18 V and has protection against reverse battery connection. An interesting solution is the use of a shockproof on / off switch with a MOSFET snap circuit, which prevents the robot from being accidentally turned off in the event of a crash. The controller does not require soldering, and all elements are connected via screw connections. The library with the description of the configuration are available in the project's GitHub repository.
Features
- Compatible with Arduino Nano / Uno (with ATMEGA328P)
- Power supply: 7 to 18 V
- Reverse polarity protection
- Shockproof on / off switch with MOSFET snap circuit
- Battery voltage can be read by software
- Switching the stabilizer to + 5V reduces heat and increases efficiency
- Motor driver: continuous current 3 A, temporary 6 A
- Test buttons and LED
- 5 x enemy sensor input (digital) with LED indicator
- 2 x input for edge sensors (analog / digital)
- 2 x general purpose output (analog / digital input or digital output)
- Starter module input (digital), with LED and integrated start button
- Servo output
- Programmable LED
- Built-in potentiometer
- Mode selection DIP switch
- Piezo buzzer
- Dimensions: 92mm x 36mm
587233
You might also like
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 70
Available
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł38.90
24h
Available quantity: 11
Available
Other products in the same category (16)
Motor with 37 mm diameter and 50 mm length, 10:1 metal gear, 24 V operating voltage, 0,1 A to 3 A power consumption, 1000 RPM speed and 5,5 maximum torque. Pololu 4689
zł159.94
6 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step) with a double shaft, a rated voltage of 6.3V, and draws a current of 0.3A per coil. Pololu 2294
zł849.44
6 weeks
No product available!
Motor with 20 mm diameter and 43 mm length, 78:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 180 RPM speed and 4.4 kg*cm maximum torque. Pololu 3465
zł145.26
6 weeks
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07B (Wide) Solid Blue
zł50.50
6 weeks
No product available!
A small low-power motor with a 250:1 metal gear, 6 V operating voltage, power consumption from 0.02 A to 0.36 A, speed 54 RPM, a maximum torque of 1.7 kg*cm and a double-sided shaft. Pololu 2207
zł101.66
6 weeks
No product available!
No product available!
Adapter that allows you to easily mount the wheels on a motor with a shaft diameter of 6 mm using screws size 4-40. The hub fits both round and D-shaped shafts. Pololu 1083
zł48.15
24h
Available quantity: 2
Available
Motor with 37 mm diameter and 54 mm length, 70:1 metal gear, 24 V operating voltage, 0,1 A to 3 A power consumption, 140 RPM speed and 31 maximum torque. Pololu 4684
zł150.98
6 weeks
No product available!
The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. This module is compatible with all of the Pololu dual-shaft mini plastic gearmotors. Pololu 1523
zł43.51
24h
Available quantity: 2
Available
Motor with 25 mm diameter and 46 mm length, 12 V operating voltage, 0,05 A to 2,1 A power consumption, 7800 RPM speed, 0,2 maximum torque and 48 CPR encoder. Pololu 4860
zł138.23
6 weeks
No product available!
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Pololu 3064
zł102.15
24h
Available quantity: 1
Available
Mini digital servo with metal gear. It has a range of motion of 145°. Pololu 1047
zł162.64
24h
Available quantity: 1
Available
Two large (120mm-diameter) wheels with black tires are made of soft, spiked rubber for increased traction, and the plastic hubs are metallic red in color. Sold in pairs. Pololu 1555
zł99.37
24h
Available quantity: 3
Available
The left Mecanum multi-directional wheel with a diameter of 48 mm, which consists of 9 rollers located around the circumference of the wheel. The wheel hub fits the popular TT motors
zł21.51
24h
Available quantity: 5
Available
Motor with 20 mm diameter and 46 mm length, 250:1 metal gear, 6 V operating voltage, 0.15 A to 2.9 A power consumption, 57 RPM speed and 12 kg*cm maximum torque. Pololu 3708
zł140.45
6 weeks
No product available!
2WD aluminum chassis with support wheel. It can be used as a base for building a small mobile robot
zł63.75
24h
Available quantity: 2
Available
A controller dedicated to Minisumo class robots. It is compatible with Arduino Uno and Arduino Nano boards. Cytron MAKER-MSUMO