Parallax Feedback 360 ° High-Speed Servo - digital servo for continuous 360 ° operation
ID: 569245
zł202.97
Tax included
zł165.02 tax excl.
The Parallax Feedback 360 ° is a digital servo designed for continuous operation. Standard PWM modeling is used for control. The recommended operating voltage is 6 V, at this voltage the servomotor has a speed of 140 rpm and a torque of 2.5 kg * cm (0.25 Nm). In addition, the servo has a Hall sensor. Pololu 3432
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Parallax Feedback 360 ° is a digital servo designed for continuous operation. The standard model PWM (50 Hz frequency) is used for control, the pulse range is 1280 μs to 1720 μs (neutral position 1500 μs). The servo can be supplied with voltage in the range of 5.8 ... 8,4V. The recommended operating voltage is 6 V, at this voltage the servomotor has a speed of 140 rpm and a torque of 2.5 kg * cm (0.25 Nm). In addition, the servomechanism has a Hall sensor, thanks to which it is possible to control the feedback loop or determine the position of the shaft. The mass of this servo is 41 g.
properties
- Adapted for continuous 360 ° operation
- Built-in Hall sensor (to determine the position of the shaft)
- Speed: 140 rpm (no load at 6V)
- Torque: 2.5 kg * cm (0.25 Nm)
- Supply voltage: 5.8 ... 8.4 V
- Cable length: 25 cm
- Dimensions: 40 x 37.2 x 20 mm
- Weight: 41 g
569245
Data sheet
- Gear material
- Plastic
- Torque
- 2,5 kg-cm
- Rozmiar serwa (seria)
- Standard
- Prędkość kątowa
- 140 RPM
- Sprzężenie zwrotne
- Tak
- Praca ciągła 360°
- Tak
- Power supply voltage
- 5,8 - 8,4 V
- Weight
- 41 g
You might also like
The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 80 oz-in (6 kg-cm), 41 g
zł77.86
24h
Available quantity: 2
Available
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.
Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.
zł75.29
24h
Available quantity: 1
Available
Other products in the same category (10)
The FT90R is a digital micro servo that has been built by FEETECH specifically for continuous rotation, offering an inexpensive and easy way to get your small turret spinning or miniature robot moving, especially when paired with 60×8mm wheels designed specifically for this servo.
zł55.71
24h
Available quantity: 1
Available
Programmable standard 17kg * cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare SC15 Servo
zł90.42
24h
Available quantity: 21
Available
The FS90R is a micro servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation, offering an inexpensive and easy way to get your small turret spinning or miniature robot moving, especially when paired with our 60×8mm wheels designed specifically for this servo. Pololu 2820
zł28.65
24h
Available quantity: 11
Available
Servo Tower Pro SG90 (micro) 360 degrees, size 23.0 x 12.2 x 29.0 mm, weight 9 g, power supply 4..6 V, torque 1.6 kg / cm at 4.8 V
zł8.94
24h
Available quantity: 68
Available
Power HD Continuous Rotation Servo AR-3606HB
zł92.07
24h
Available quantity: 4
Available
The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.
zł102.99
24h
Available quantity: 2
Available
SpringRC SM-S4303R Continuous Rotation Servo
zł87.27
24h
Available quantity: 2
Available
Programmable standard 30 kg*cm servo controlled by UART interface. It can work in the rotation angle control mode or in the continuous operation mode. Waveshare ST3215 Servo
zł113.96
24h
Available quantity: 56
Available
Standard analog servo equipped with a plastic gear. Adapted to continuous operation 360°. Pololu 3448
zł138.71
6 weeks
No product available!
Standard digital servo equipped with a metal gear. It is characterized by high torque and high durability. DS3225
zł220.94
24h
Available quantity: 2
Available
The Parallax Feedback 360 ° is a digital servo designed for continuous operation. Standard PWM modeling is used for control. The recommended operating voltage is 6 V, at this voltage the servomotor has a speed of 140 rpm and a torque of 2.5 kg * cm (0.25 Nm). In addition, the servo has a Hall sensor. Pololu 3432