Small Stepper Motor - 12V bipolar stepper motor
ID: 202854
zł52.88
Tax included
zł42.99 tax excl.
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. It has an output shaft with a diameter of 3 mm and a torque of up to 100 g/cm. When using a current limiting controller, a 12 V supply voltage can be used with a current limitation of 400 mA. If a driver without current limitation is used, the input voltage must be lowered to keep the motor current below 400 mA.
Features
- Step angle: 7.5 degrees
- 2-phase bipolar motor
- Rated voltage: 12V
- Rated current: 400 mA
- Drive shaft with a diameter of 3 mm
- 4-wire cable
- Torque: 100 g/cm
202854
Data sheet
- Shaft diameter
- 3 mm
- Resolution
- 48 kroków/obr
- Torque
- 100 g-cm
- Coil resistance
- 4 Ω
- Coil current
- 400 mA
- Inductance of the coil
- 3,5 mH
- Voltage
- 12 V
- Weight
- 61,1 g
You might also like
The ULN2003A system consists of seven Darlington chips, housed in a DIP16 housing.
zł1.40
24h
Available quantity: 80
Available
DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982
zł84.27
24h
Available quantity: 1
Available
The stepper motor driver with Allegro A4988 (A4988 Stepper Motor Driver Carrier) allows you to supply a bipolar current of up to 2A per phase. The system can be supplied with voltage up to 35V, in the set there is a heat sink. It is compatible with Polol 1182
zł5.60
24h
Available quantity: 80
Available
Other products in the same category (16)
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Pololu 2267
zł148.20
24h
Available quantity: 2
Available
NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8 ° per step), a rated voltage of 12 V, and consumes up to 0.5 A per coil. JK42HS40-0504
zł63.55
24h
Available quantity: 11
Available
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 2 A per coil. Pololu 1475
zł276.76
6 weeks
No product available!
NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.4 V and a current consumption of 1.5 A per coil. 17HD40005-300N
zł185.00
24h
Available quantity: 1
Available
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 7.4 V, and has a current consumption of 1 A per coil. Pololu 1472
zł262.26
6 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 1.2 A per coil. OK42HB40-1204A-TJ750
zł59.06
24h
Available quantity: 2
Available
NEMA23 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2.5 V and draws a current of 2.8 A per coil. 57BYG56-2804S
zł100.56
24h
Available quantity: 6
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 4 V and draws a current of 1.2 A per coil. Pololu 1200
zł175.09
24h
Available quantity: 5
Available
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.3 V, and consumes up to 0.8 A per coil. Pololu 2256
zł168.69
6 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 4.5 V, and draws a current of 1 A per coil. Pololu 2297
zł424.58
6 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 3.5 V, and draws a current of 1 A per coil. Pololu 2298
zł503.05
24h
Available quantity: 1
Available
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476
zł204.29
24h
Available quantity: 2
Available
This NEMA 17 pancake bipolar stepping motor from Sanyo features an integrated encoder. The stepper motor itself has a 1.8° step angle (200 steps/revolution) and each phase draws 1 A at 5.4 V, allowing for a holding torque of 1.9 kg-cm.
zł1,381.11
6 weeks
No product available!
Hybrid bipolar stepper motor eith integrated 18cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2689
zł330.88
6 weeks
No product available!
Bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil. 42BYGHW208
zł53.68
Delivery date unknown
No product available!
Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), has a nominal voltage of 8.6 V, and draws a current of 1 A per coil. Pololu 1477
zł276.76
6 weeks
No product available!
Bipolar stepper motor powered with a voltage of up to 12 V and a maximum current of 400 mA. SparkFun ROB-10551