DM860H - 7.2A 80VAC/110VDC stepper motor driver with a fan
ID: 582976
zł199.00
Tax included
zł161.79 tax excl.
Stepper motor driver that can operate with a voltage in the range from 24 to 110 VDC or from 18 to 80 VAC and a maximum current of 7.2 A. It allows for microstep configuration in the range from 2 to 256. DM860H
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
A professional stepper motor driver that can work with a voltage in the range from 24 to 110 VDC or from 18 to 80 VAC and a maximum current of 7.2 A. DM860H uses an advanced DSP algorithm and provides smooth control with optimal torque. It has a built-in automatic configuration and motor identification function, so it can work with various types of stepper drives. The controller is equipped with 8 switches enabling configuration of the maximum current and microstep in the range from 2 to 256 (from 400 to 51200 pulses per revolution). The device has overload protection and galvanic isolation and is equipped with a cooling fan. Perfect for industrial control systems.
Features
- Control of 2-phase and 4-phase motors
- Maximum signal frequency up to 200 kHz
- Micro-step up to 1/256 (adjustable), up to 51,200 control pulses per motor revolution
- The possibility of dividing the step on a decimal scale
- Full galvanic isolation of inputs
- Overload protection
- Supply voltage: 24 to 110 VDC or from 18 to 80 VAC
- Maximum current: 7.2 A (adjustable)
- Optimum torque
- Soft-start function
582976
Data sheet
- Output current
- 7,2 A
- Number of channels
- 1
- Supply voltage min
- 24 V
- Supply voltages max
- 110 V
You might also like
Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 4.2 A. It allows you to configure the microstep in the range from 2 to 128. DM542
zł78.06
24h
Available quantity: 14
Available
Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 5.6 A. It allows you to configure the microstep in the range from 2 to 128. DM556
zł76.11
24h
Available quantity: 14
Available
Other products in the same category (16)
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2980
zł66.88
24h
Available quantity: 1
Available
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
zł288.91
6 weeks
No product available!
Advanced, compact stepper motor driver with TMC2209 chip that offers smooth, quiet operation, high performance, various operating modes and easy configuration, ideal for 3D printers and other applications. modTMC2209v4
zł31.02
Delivery date unknown
No product available!
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
zł36.57
24h
Available quantity: 5
Available
Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be powered with a current of up to 1.2 A per phase and can be supplied with the voltage from 4.5 V to 45 V. Pololu 3764
zł54.86
6 weeks
No product available!
A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2981
zł80.12
24h
Available quantity: 4
Available
Tic T500 USB is a stepper motor driver based on the MP6500 chip. It allows you to control the stepper motor whose voltage on the coil is 4.5-35V, the maximum current per coil is up to 1.5A. The controller can be controlled by: USB, TTL, I2C, RC (PWM model) etc. Pololu 3134
zł221.22
24h
Available quantity: 2
Available
Two-channel driver of direct current (DC) motors with an operating voltage from 4 to 16 V and a maximum continuous current of 3 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD3A
zł38.31
24h
Available quantity: 14
Available
MP6500 Stepper Motor Driver Carrier, Digital Current Control
zł33.70
24h
Available quantity: 2
Available
Module with a stepper motor driver based on the DRV8434A system. It allows the bipolar motor to be supplied with current up to 1.2 A per phase and with a voltage from 4.5 V to 45 V. Communication via the SPI interface. Pololu 3766
zł54.86
6 weeks
No product available!
The stepper motor driver with Allegro A4988 (A4988 Stepper Motor Driver Carrier) allows you to supply a bipolar current of up to 2A per phase. The system can be supplied with voltage up to 35V, in the set there is a heat sink. It is compatible with Polol 1182
zł5.60
24h
Available quantity: 80
Available
Extension board with stepper motor controller based on the STSPIN820 system. Ideally suited for use, among others in 2D / 3D printers, robots, cameras. Pololu 2878
zł88.17
24h
Available quantity: 1
Available
Two axis stepper motor driver expansion board based on the L6470 for STM32 Nucleo
zł85.49
24h
Available quantity: 5
Available
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3763
zł52.47
24h
Available quantity: 2
Available
Stepper motor driver based on TB67S249FTG. It allows you to control a stepper motor with voltage from 10 to 47V, with a maximum current of 1.8A. The controller can be controlled using: USB, Serial TTL, I2C, RC (PWM modeling), analog input or quadrature encoder. Pololu 3138
zł351.85
24h
Available quantity: 1
Available
A compact stepper motor controller with a TMC2225 system with an operating voltage from 4.75 to 36 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via a STEP/DIR or UART interface and is an ideal solution for 3D printers and similar applications
zł19.62
24h
Available quantity: 1
Available
Stepper motor driver that can operate with a voltage in the range from 24 to 110 VDC or from 18 to 80 VAC and a maximum current of 7.2 A. It allows for microstep configuration in the range from 2 to 256. DM860H