Teensy 4.1 without Ethernet - development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller (with connectors)
ID: 1181424
714833879992
zł195.93
Tax included
zł159.29 tax excl.
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller operating at 600 MHz. It has four times the flash memory than in version 4.0 and two slots for adding optional external memory. The Teensy 4.1 is the same size and shape as the Teensy 3.6 and provides more I/O capabilities including an SD card slot and a USB host port. There is no Ethernet communication.
The module has 55 digital input/output lines, 35 of which can be used as PWM outputs, as well as 18 analog pins. Each Teensy 4.1 module has a bootloader, so it can be programmed using the built-in USB connector. No external programmer is needed. The programs can be written in any environment that supports the C language or in the Arduino IDE after installing the Teensyduino extension.
Features
- ARM Cortex-M7 at 600MHz
- 1024K RAM (512K is tightly coupled)
- 8 Mbyte Flash (64K reserved for recovery & EEPROM emulation)
- USB Host Port
- 2 chips Plus Program Memory
- 55 Total I/O Pins
- 3 CAN Bus (1 with CAN FD)
- 2 I2S Digital Audio
- 1 S/PDIF Digital Audio
- 1 SDIO (4 bit) native SD
- 3 SPI, all with 16 word FIFO
- 7 Bottom SMT Pad Signals
- 8 Serial ports
- 32 general purpose DMA channels
- 35 PWM pins
- 42 Breadboard Friendly I/O
- 18 analog inputs
- Cryptographic Acceleration
- Random Number Generator
- RTC for date/time
- Programmable FlexIO
- Pixel Processing Pipeline
- Peripheral cross triggering
- microSD Card Socket
- Power On/Off management
1181424
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.35
24h
Available quantity: 27
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 6
Available
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
zł199.00
24h
Available quantity: 25
Available
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE
zł191.67
24h
Available quantity: 11
Available
Other products in the same category (16)
The adapter allows the Teensy 3.x family to be similar to the Feather family tiles. Thanks to this, it is possible to use a wide range of extensions for Feather tiles. Adafruit 3200
zł38.92
4 weeks
No product available!
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
zł199.00
24h
Available quantity: 29
Available
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR
zł69.90
24h
Available quantity: 2
Available
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. PJRC ETHERNET-KIT
zł26.20
24h
Available quantity: 14
Available
Module with 4 Qwiic connectors for Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Communication via the I2C interface. SparkFun DEV-17156
zł29.43
24h
Available quantity: 6
Available
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has led out pads with microSD card interface and USB Host. Version with access to a secure software update. PJRC TEENSY40-LOCK
zł149.00
24h
Available quantity: 15
Available
A development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It is equipped with a DP83825 PHY Ethernet chip. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY41_PINS
zł199.90
24h
Available quantity: 7
Available
Adapter dedicated to Teensy LC, Teensy 3.1 and Teensy 3.2 boards, which allows you to connect Arduino shields to them. SparkFun KIT-15716
zł67.90
24h
Available quantity: 2
Available
Teensy 4.1 is the fastest microcontroller with ARM Cortex-M7 600 MHz processor, 55 I/O pins, many communication interfaces, and additional functions such as cryptography and RTC, enabling USB programming. It is equipped with a microSD slot and an additional 8 MB PSRAM memory chip
zł219.00
Delivery date unknown
No product available!
Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT
zł17.32
24h
Available quantity: 20
Available
Adapter with micro SD card slot. It is equipped with connectors compatible with Teensy LC, 3.0, 3.1, 3.2, 3.5 and 3.6 boards and WIZ820io or WIZ850io Ethernet modules. WIZ820-SD-ADAPTOR
zł45.90
24h
Available quantity: 2
Available
Development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY40_PINS
zł156.68
24h
Available quantity: 28
Available
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
zł179.57
4 weeks
No product available!
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC
zł61.16
24h
Available quantity: 1
Available
Audio module designed for Teensy 4.0 and 4.1. It uses the SGTL500 audio codec chip with I2S interface, it can work with a microSD card or SPI Flash memory. Audio Adapter Boards for Teensy 4.x (Rev D)
zł89.43
24h
Available quantity: 18
Available
8 MB PSRAM memory chip, designed for mounting on Teensy 4.1 boards. It enables the expansion of the memory of the microcontroller. PJRC IC-PSRAM-8MB-SOIC8
zł11.92
24h
Available quantity: 33
Available
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS