List of products by brand Inny

Electrochemical sensor that measures the concentration of ethyl alcohol in the air. The current flowing through the gas sensor is directly proportional to the gas concentration

Module with INA219 system with bi-directional current meter

A red Teflon tube with a diameter of 2x4mm, designed for 3D printers using a 1.75mm filament, is characterized by excellent thermal and anti-adhesive properties, which ensures smooth material flow and long element life, even with intensive use of the device

Robot controller with built-in I2C port, SPI interface, RS232, USB, Ethernet, PWM outputs and relays. It is equipped with LEDs, buttons and a built-in accelerometer. roboRIO 783581-01

A module with a temperature sensor based on the absorption of infrared radiation. Enables non-contact measurement. modTMP006

Nozzle designed for 3D printers with the popular E3D(V6) hotend. It is made of clad copper with very good thermal conductivity, which allows for high printing speeds

Nozzle designed for 3D printers with the popular E3D(V6) hotend. It is made of hardened steel, which ensures high abrasion resistance, which is especially important when printing with materials with admixtures of metals, carbon fibers and glass fibers

Nozzle designed for 3D printers with the popular E3D(V6) hotend. It is made of hardened steel, which ensures high abrasion resistance, which is especially important when printing with materials with admixtures of metals, carbon fibers and glass fibers

A blue Teflon tube with a diameter of 2x4mm, designed for 3D printers using a 1.75mm filament, is characterized by excellent thermal and anti-adhesive properties, which ensures smooth material flow and long element life, even with intensive use of the device

Audio receiver with Bluetooth 5.0 communication based on the QCC3008 module. It can be powered with the voltage from 3.6 V to 5.5 V, including with a lithium battery

Temperature sensor based on the DS18B20 chip. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface

WS2812B

Connector for fixing Teflon tubes in pneumatic systems. It is also used in 3D printing, where it is used to attach the filament supply tube to the print head

Connector for fixing Teflon tubes in pneumatic systems. It is also used in 3D printing, where it is used to attach the filament supply tube to the print head

LED display 14,20mm 0,56 "single, ultra-red (635nm), 40 mcd (20mA), common anode. LED1-AS-05613BMR-B PBF

Stereo audio amplifier based on the TPA3116D2 chip. It can be powered from 12 to 26 V and has two 120 W outputs. XH-M543

Microphone preamplifier based on the AD828 chip. Powered with DC voltage from 9 V to 24 V or AC in the range from 8 V to 16 V

The AM2301A temperature and humidity sensor is designed to measure in a variety of environmental conditions. It offers a measuring range of temperature from -40 to +80 °C and humidity from 0 to 100%RH. AM2301A

Laser rangefinder with a range of up to 100 m and an accuracy of 1.5 mm with a spirit level function. It is equipped with a clear display and a function of storing the last 30 measurements. It can measure length, area and volume with the press of a button. Aneng B100

Temperature sensor based on a DS18B20 chip replacement. It is enclosed in a waterproof measuring probe. It has a 2 m cable and communicates via a 1-Wire interface