List of products by brand Inny

Touch keyboard module with 4 buttons based on the TTP224 system. It is equipped with a connector with derived signals and 4 LEDs signaling the state of each button

A needle with a diameter of 0.6 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

Acrylic case designed for Raspberry Pi Zero W minicomputers. The user has free access to all minicomputer ports, including GPIO connectors

A needle with a diameter of 0.8 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

2.4 "TFT LCD display module with touch panel with SD card slot. Resolution 240x320. Based on the ILI9341 controller. Powered by 3.3V or 5V.

Light ring with 40 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.

FLUX LED 7.62 x 7.62 [mm] 5mm ultra red, angle 90 degrees; light 1200 mcd (20mA) (2.0V) df630 nm, anode at the corner marked

Metal case with fan for Raspberry Pi 4 model B in blue.

Step-Up/Step-Down converter with adjustable output voltage from 0.8 to 33 V, input voltage from 4.5 to 30 V and a maximum current of 5 A. It is equipped with a voltmeter with a display

Audio preamplifier based on the NE5532 chip. Powered with symmetrical DC voltage in the range from 9 to 15 V

Stereo audio isolator based on two transformers. It allows to eliminate noise in the audio path resulting from different ground resistances of the sound source and the receiver. XH-M372

7-segment LED display, 1 digit 30.60mm, black background green (575nm), 20mcd (10mA), common anode, red (630nm), 20mcd (10mA), common anode. Pb-free. LED1-AS-B-12011BMRMG

LT86102SXE, 2-port HDMI/DVI splitter , LQFP80

Acrylic case designed for Raspberry Pi Zero W minicomputers. The user has free access to all minicomputer ports, including GPIO connectors

A small magnet designed for mounting RGB matrix displays. It fits perfectly into the holes in the panels

Ethernet Module with SPI Interface (ENC28J60 chip)

7-segment LED display, 1 digit 20.40mm, red color (630nm), 6 mcd (10mA), common anode, Pb-free. LED1-AS-B-08011BS

LED 5 mm OVAL ultra white, angle 130 degrees / 70 degrees; light 3000 mcd (20mA) (3.2V)

50 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect the radio to an external power amplifier. Fwaeh FH-103

A module with an active low-pass filter based on NE5532 systems. Dedicated to the bass column (subwoofer)