List of products by brand Inny

ESC RC controller module with FlySky receiver designed for two brush motors with a supply voltage from 2.5 to 5 V and a current consumption of 2 A

DVB-T digital TV tuner for a PC computer, including an internal antenna, remote control and multimedia software. The receiver is based on the RTL2832U system and the 820T head, thanks to which it can be program controlled.

Brushless DC motor driver (BLDC) with speed regulation by potentiometer or PWM signal. It can operate motors powered with the voltage from 6 to 60 V with a current consumption of up to 16 A

Brushless motor driver module (ESC regulator) with current efficiency up to 20 A. Uses BLHeli_S software

Driver module for two DC brushed motors with current efficiency up to 5 A per channel. It can work with LiPo 2S and 3S packets

Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini

170 kV brushless DC motor with Hall sensor. Powered with the voltage from 18 to 42 V, dedicated to electric skateboards and scooters

Panel thermometer with a 7-segment LED display with a measuring range from -50 to 110 °C. It is powered with the voltage of 12 V

The module with an 8x8 LED matrix designed for Wemos D1 Mini

Single-core, multi-strand wire in black silicone insulation. 18AWG thickness, 4m length

Single-core, multi-strand wire in green silicone insulation. 18AWG thickness, 4m length

Single-core, multi-strand wire in blue silicone insulation. 18AWG thickness, 4m length

Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs

Aluminum tape, 50 m long and 2 cm wide. It is used to protect components during soldering with hot air

3-pin mounting strip, 3.5 mm pitch. 333K-3.5-03P-12-00A(H)

LED strip with COB diodes in white (cold). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20

Universal loudspeaker with a power of 3 W and a resistance of 4 Ω. It has a diameter of 40 mm

3-pin ARK mounting strip, 5.0 mm pitch. 332K-5.0-03P-12-00A(H)

LED strip with addressable RGB WS2813 diodes on a black PCB. It is powered by 5 V DC, has a length of 1 m and 30 LEDs/m. Protection level IP30

LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP30