List of products by brand Inny

Digital multimeter with large display. It can measure AC voltage and DC voltage, AC and DC current, resistance, capacitance, frequency and temperature. Besides, it has functions of diode test, circuit continuity test and NCV test.

A set of ferrules terminals. The box contains 870 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.

Set of flat and fork connectors. The box contains 330 connectors in three colors: red, blue and yellow. Connectors are designed for wires from 10 to 22 AWG.

A set of 8 double-sided universal boards with dimensions of 2 x 8, 3 x 7, 4x6, 5x7, 6x8, 7x9, 8x12, 9x15 cm.

A set of 328 colored heat shrink tubes with a diameter of 1, 2, 3, 4, 6, 8, 10 and 14 mm and a length of 40 or 80 mm.

A glass fuse with dimensions of 5x20mm and a current of 0.5A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

SIM800L module with support for four-band GSM/GPRS network. Has a MicroSD card slot. Module controlled by AT commands.

The Step-Down converter module on the MP1584EN chip converts the 4.5-28V input voltage to 12V output voltage with a maximum current of 3A and an efficiency of up to 92%. It is a compact device measuring 22 x 17 x 4 mm, operating in a temperature range of -20°C to 85°C, ideal for a variety of industrial applications.

Step Down converter module with an output voltage of 5 V and a maximum current of 2x2,5 A. The board is equipped with four USB connectors

Single board computer with NXP i.MX 8M processor with 2 GB of DDR4 memory, Gigabit Ethernet port, two USB 3.0 ports, HDMI output, MIPI-DSI, MIPI-CSI, WiFi, Bluetooth Low Energy and MicroSD card slot. MaaXBoard AES-MC-SBC-IMX8M-G

The two-channel DDS signal generator supports a frequency range of up to 15MHz with a precision of up to 0.01uHz and DDS technology ensures signal stability. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance. Junctek JDS6600-15

Universal service holder for repairing printed circuit boards. Enables quick and stable mounting of the plate in the clamps

The two-channel signal generator offers a frequency range of up to 15MHz for square and triangle waves and up to 6MHz for pulses and arbitrary waves. The device provides high precision with a frequency accuracy of 20ppm and stability of 1ppm/3h, as well as pulse width adjustment functions and an amplitude resolution of 1mV.

Set of 10 soldering tips from the 900M series - 900M-T-2.4D/2C/I/1.2D/3C/4C/K/3.2D/B/I (12J). Suitable for soldering stations of manufacturers Aoyue, Repro, Yihua, WEP, Quick

The symmetrical power supply based on LM317 and LM337 offers a DC output in the range of 1.3-25 V with a power of 25W and a current of up to 1A. Equipped with a resettable fuse for overload protection, it is compact with dimensions of 62 x 59 x 30 mm.

The LM7812 12 V 1.2 A linear stabilizer module is a reliable and easy-to-use voltage stabilization solution for all electronics projects. Thanks to its solid construction, built-in protections and high efficiency, this module provides a safe and constant 12 V power supply, being an invaluable component in the work of every electronics engineer

Brass chip cleaner, in a metal stand, for cleaning soldering tips from tin residue

The LM7805 5V 1.2A linear stabilizer module is a reliable and easy-to-use voltage stabilization solution for all electronics projects. Thanks to its solid construction, built-in protections and high efficiency, this module provides a safe and constant 5V power supply, being an invaluable component in the work of every electronics engineer

4-digit LED watch in the form of a kit for self-assembly. Equipped with a light sensor, thermistor and buzzer, it is controlled by two buttons

A kit for self-assembly of a fidget spinner. The board is equipped with a LED backlight consisting of 11 LEDs