List of products by brand Trenz electronic GmbH

Module with Xilinx Kintex-7 XC7K70T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF

Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF

Base plate designed to work with TE0745 modules. TEB0745-02

Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04

Base plate for Trenz Electronic 4 x 5 cm modules. It allows you to connect an FPGA system through board-to-board connections to external peripherals to test and develop software. TE0701-06

UltraITX + base board designed to work with TE0808 UltraSOM + MPSoC modules. It allows you to connect the module to external connectors and interfaces. TEBF0808-04

TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01

TE0706 is a base plate for Trenz Electronic 4x5cm Muduors. It allows you to connect USB, JTAG and Ethernet interfaces. TE0706-02

Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-05

Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C

Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L

Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C

Trenz TE0808-04-09EG-1EA is a module containing the Xilinx Zynq Ultrascale + MPSoC (XCZU9EG-1FFVC900E) system, 2 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and pulse converters for all internal voltages power. Trenz TE0808-04-09EG-1EA

Trenz TE0808-04-09EG-2IA is a module containing the Xilinx Zynq Ultrascale + MPSoC system, 4 GB DDR4 SDRAM memory, 64 MB flash memory, 20 transceivers with 1 Gbit bandwidth and impulse converters for all internal supply voltages. TE0808-04-09EG-2IB

Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H USB2 IC. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-02

Rasberry Pi compatible FPGA module integrating Xilinx Zynq-7010, 512 MB DDR3L SDRAM, 4 USB ports, Ethernet port and 16 MB Flash memory. Trenz Electronic TE0726

Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H chip. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-03

Industrial SoC module integrating Xilinx Zynq 7020 SoC, Gigabit Ethernet transceiver, 1 GB DDR3 SDRAM and 32 MB Flash memory. Trenz Electronic TE0720-03-2IF

Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-02

Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-01