Trenz TE0741-03-325-2CF - set with Xilinx Kintex-7 system
ID: 565285
zł3,628.94
Tax included
zł2,950.36 tax excl.
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
Description
Module with Xilinx Kintex-7 XC7K325T-2CF system, FLASH memory with 32 MB capacity and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. All modules in this series are mechanically and also largely electrically compatible. You can use TEBA0841-01 or TE0703-05 as the base plate for the module .
properties
- Xilinx Kintex-7 T XC7K325T-2FBG676C FPGA chip
- 32 MB of Quad-SPI FLASH memory available via FPGA and JTAG
- 8 systems of very fast data transmission (MGT) with a maximum throughput of 6.6 Gb / s
- FPGA configuration possible via JTAG (B2B) and FLASH memory
- A 25 MHz oscillator with a small jitter
- Four programmable clocks on Silicon Labs Si5338 generator
- Built-in DC-DC high efficiency converters: 3.3V and 5V
- Two Samtec LSHM 100-pin and one 60-pin connectors for connecting the base plate
- Up to 144 FPGA input / output pins available to the user
- Two LEDs for the user + one connected to the DONE pin of the FPGA chip
- AES encryption
- Evenly distributed power pins to ensure signal integrity
- Working temperature: 0 to 70 ° C
- Size: 4 x 5 cm
Included
- Module TE0741-03-325-2CF
- 4 screws
565285
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
Delivery date unknown
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
Delivery date unknown
No product available!
Other products in the same category (16)
Industrial SoC module integrating Xilinx Zynq 7020 SoC, Gigabit Ethernet transceiver, 1 GB DDR3 SDRAM and 32 MB Flash memory. Trenz Electronic TE0720-03-2IF
zł1,938.34
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-02-325-2CF
zł2,950.12
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-100-2C
zł911.23
4 weeks
No product available!
Module with Xilinx Artix 7 35T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. TE0710-02-35-2CF
zł956.66
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2C1 system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2C1
zł5,031.06
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2CF
zł2,608.89
4 weeks
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
zł1,967.40
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
zł1,488.67
4 weeks
No product available!
Universal USB2.0 adapter for JTAG, UART and GPIO based on the FTDI FT2232H chip. The adapter card converts signals from USB2.0 to standard serial or parallel interfaces of embedded systems such as JTAG, SPI, I²C and UART. Compatible with Xilinx tools. Trenz TE0790-03
zł321.17
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3
zł1,458.99
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K70T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF
zł2,011.30
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60
4 weeks
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
4 weeks
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-02
zł631.22
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-100-2C
zł1,015.12
4 weeks
No product available!
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
4 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF