TE0712-02-100-2C3 - set with Xilinx Artix-7 system
ID: 565110
zł1,458.99
Tax included
zł1,186.17 tax excl.
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. The product includes Samtec LSHM connectors with a height of 2.5 mm. All modules in this series are mechanically and also largely electrically compatible. You can use TEBA0841-01, TE0703-05 , or TE0705-04 as the base plate for this module.
properties
- Xilinx Artix-7 XC7A100T-2FGG484C FPGA chip
- High resistance to shock and vibration
- 32 MB of Quad-SPI FLASH memory available via FPGA and JTAG
- 4 GTP channels - fast data transmission with a maximum bandwidth of 6.6 Gb / s
- 1 GB 32-bit DDR3 SDRAM
- Layer implementing the Ethernet physical layer (PHY) in RMII mode
- Programmable PLL loop with small jitter (Silicon Labs Si5338)
- Built-in high-performance DC-DC converters
- 12 A x 1.0 V
- 1.5 A x 1.8 V
- 1.5 A x 1.5 V
- Supply voltage: 3.3 V
- Two Samtec LSHM 100-pin and one 60-pin connectors for connecting the base plate (2.5 mm low profile)
- 158 input / output lines (78 symmetric pairs) FPGAs available on board-to-board connections
- System management and power sectioning
- EFUSE encryption
- AES encryption
- Two LEDs
- Evenly distributed power pins to ensure signal integrity
- Working temperature: 0 to 70 ° C
- Size: 4 x 5 cm
Recommended software
Xilinx Vivado WebPACK Edition (Free license)
565110
You might also like
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
Delivery date unknown
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
Delivery date unknown
No product available!
Other products in the same category (16)
Module with Xilinx Kintex-7 XC7K70T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-070-2CF
zł1,344.00
6 weeks
No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2CF
zł2,608.89
6 weeks
No product available!
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-06
zł663.47
6 weeks
No product available!
Module with Xilinx Artix 7 100T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. TE0710-02-100-2CF
zł1,141.23
6 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2C1 system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2C1
zł5,031.06
6 weeks
No product available!
Base plate designed to work with TE0745 modules. TEB0745-02
zł1,907.83
6 weeks
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L
zł911.23
6 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
zł1,488.67
6 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
zł3,628.94
6 weeks
No product available!
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83
6 weeks
No product available!
Module with Xilinx Kintex-7 XC7K325T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2IF
zł3,820.58
6 weeks
No product available!
Module with Xilinx Kintex-7 XC7K410T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-410-2CF
zł5,069.38
6 weeks
No product available!
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2C
zł911.23
6 weeks
No product available!
Module with Xilinx Artix-7 35T, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-35-2C
zł633.04
6 weeks
No product available!
Module with Xilinx Artix-7 15T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-15-1C
zł460.23
6 weeks
No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60
6 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3