Category: Robotic arms
There are 9 products.
A set for self-assembly of a robotic arm with four degrees of freedom (4DOF) equipped with MG90S servomechisms. The arm at the end has a small gripper which allows you to catch and carry small objects. The handle is controlled using a plate compatible with Arduino Uno or a module with potentiometers.
A robotic gripper based on the SG92R servo. It has an opening and closing angle of 90° and mounting holes compatible with Lego. M5Stack U102
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0142
No product available!
Bionic hand controlled by servos. It is made of acrylic material, allows you to control each finger separately. DFRobot ROB0143
No product available!
Empower your Romi robot to manipulate its surroundings with this robotic arm accessory kit! The kit contains everything you need to build the arm, including a micro gripper and three servos—one for controlling the height of the arm, one for controlling the tilt of the gripper, and one for actuating the gripper paddles themselves.
No product available!
A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551
No product available!
Four degrees of freedom (4DOF) robotic arm assembly kit. The robotic arm was based on servos and is controlled wirelessly using a Raspberry Pi. Waveshare Robot Arm for Pi (for Europe)
No product available!
A 5 DoF robotic arm built with servos and ESP32. It can be controlled wirelessly via WiFi and web browser or USB interface. Waveshare RoArm-M1 (EU)
No product available!
A robotic arm with four degrees of freedom (4 DoF) based on servomechanisms and a controller with an ESP32 module. It can be controlled wirelessly via WiFi and a web browser or USB interface. Waveshare RoArm-M2-S (EU)
No product available!