Category: 3D PRINTING
There are 338 products.
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle
Threaded pipe used to connect the heat sink and heating block, contains a Teflon tube in the middle, adapted to a 1.75 mm filament
Threaded pipe used to connect the heat sink and heating block, contains a Teflon tube in the middle, adapted to a 1.75 mm filament
Cooling fan powered with the voltage of 5 V with a lead out a cable with a two-pin connector with a pitch of 2.54 mm
Eccentric spacer with an internal diameter of 5 mm. Allows adjustment of the roller pressure on V-Slot aluminium profiles in 3D printers or CNC machines.
Eccentric spacer with an internal diameter of 5 mm. Allows adjustment of the roller pressure on V-Slot aluminium profiles in 3D printers or CNC machines.
Eccentric spacer with an internal diameter of 5 mm. Allows adjustment of the roller pressure on V-Slot aluminium profiles in 3D printers or CNC machines.
Silicone pad with a working temperature of up to 200°C. Used to level tables in 3D printers as an alternative to a set of springs
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
PC4 Bowden mount with M6 thread on a 4 mm diameter tube (fits 1.75 mm filament). Used to connect PTFE tubes with an extruder in 3D printers
A nozzle with a diameter of 0.4 mm for the E3D V6 head used, among others, in in Prusa printers. Designed for 1.75 mm filaments
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table
DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. It is compatible with Polol 2133
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
Bearing GT2 pulley for shaft diameter 5 mm. It has 20 teeth, suitable for a 6mm wide belt
A cleaning element with a sponge dedicated to the filament used for 3D printing. It allows you to get rid of dust and dirt from the material
Bearing GT2 20T pulley for a shaft with a diameter of 5 mm. Without teeth, suitable for 6 mm wide belt
Spring dedicated to the heating table of 3D printers. It allows you to adjust the degree of tightening the knob, and thus enables the proper leveling of the working table