Category: Adafruit Feather
There are 45 products.
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5477
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
Feather development board with RP2040 microcontroller, featuring a USB-C port and a USB Type A host port, 8MB Flash memory, LiPo battery support and a STEMMA QT connector. Adafruit 5723
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
Board with RP2040 microcontroller and class D mono audio amplifier based on MAX98357 chip. It has a built-in LIS3DH three-axis accelerometer, an RGB NeoPixel LED, a LiPo charging circuit, and a STEMMA QT connector. Adafruit 5768
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
This development board with a microSD slot is ideal for data logging in measurement and IoT projects. Equipped with USB-C, a Li-Po charger, and a STEMMA QT connector, it\'s ideal for portable devices requiring easy expansion with I2C sensors. A powerful RP2040 microcontroller with 8MB of Flash and a rich GPIO set ensures high performance and a wide range of applications. Adafruit 5980
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5323
A board with an RP2040 microcontroller and a radio module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and a STEMMA QT connector. Adafruit 5712
Development board with the ATmega32u4 microcontroller, integrated RFM69HCW 433MHz radio module, USB interface, and LiPo battery charging circuit, intended for building wireless communication systems with longer range than 2.4GHz networks. Adafruit 3077
Development board with the ATmega32u4 microcontroller and an integrated RFM96W LoRa 433MHz radio module, USB interface, and LiPo battery charging circuit, intended for building long-range wireless communication systems with low power consumption. Adafruit 3079
This compact IoT board features a dual-core 240 MHz processor, 2.4 GHz WiFi, and Bluetooth LE. The w.FL antenna connector allows for an external antenna, increasing range and stability. The board offers 8 MB of Flash, 512 KB of SRAM, native USB with HID and MIDI support, and a built-in LiPo charger with a MAX17048 battery monitor. It also includes a STEMMA QT connector, a programmable NeoPixel, and full compatibility with the Feather ecosystem. The Adafruit 5885
A compact development board with a built-in 1.14" IPS display, ideal for user interfaces, IoT projects, and case-mounted devices. Featuring the ESP32-S3 with Wi-Fi, Bluetooth LE, and native USB, it offers 4MB of Flash and 2MB of PSRAM to support more advanced graphics and networking applications. Three user buttons, a STEMMA QT connector, and an integrated LiPo charger provide convenient prototyping and expansion capabilities. Adafruit 6303
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
A modern development board in the Feather format, equipped with a dual-core Raspberry Pi RP2350 Cortex M33 microcontroller clocked at 150 MHz and 8 MB of PSRAM, ideal for advanced IoT projects and Micropython/CircuitPython applications. The board offers a wide range of ports, including an HSTX 22-pin connector, USB-C with bootloader, and STEMMA QT, as well as numerous GPIOs and an integrated LiPo battery charger, combining high performance with convenience of use. Adafruit 6130
This compact ESP8266-based development board is ideal for IoT projects requiring 802.11 b/g/n Wi-Fi connectivity. It features a built-in CP2104 USB-to-UART converter with auto-reset, 4MB of Flash memory, and 9 GPIO pins with I2C and SPI support. The board also includes a LiPo battery header, a 100mA charger, and pre-soldered connectors for quick prototyping. Adafruit 3213
Module with WiFi Espressif ESP32-S2. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5000
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
Adafruit Feather 328P is a module with a built-in ATmega 328P AVR microcontroller (8MHz, 32kB Flash, 2kB RAM). The board is compatible with Arduino IDE, has small dimensions and low weight, and the built-in USB connector allows programming and debugging. Adafruit 3458
Bluetooth Low Energy, 2.4GHz spectrum wireless protocol. Excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. Adafruit 2829