Category: M5Stack

M5Stack

The M5Stack category offers a wide range of advanced controllers, peripheral modules, and development kits ideal for various IoT and embedded system projects. These products are characterized by high performance, compact size, and ease of use, making them an excellent choice for professionals and hobbyists alike.

Filter by

Manufacturers
more... less
Filter

Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152

zł285.02
24h
Available quantity: 47
Available

An expansion module combining long-range LoRa 868–923 MHz communication with precise GNSS positioning in a single, compact device. The SX1262 offers high receive sensitivity down to -147 dBm, transmit power up to +22 dBm, and low power consumption, making it ideal for IoT and telemetry applications. The integrated ATGM336H GNSS receiver supports multiple satellite systems and provides sub-1.5 m positioning accuracy. The module is designed for use with the Cardputer-Adv. M5Stack U214

zł87.90
24h
Available quantity: 27
Available

Compact development platform based on the ESP32-PICO-D4 microcontroller, featuring WiFi and Bluetooth connectivity, a Grove interface, a programmable RGB LED, an infrared transmitter, and a USB Type-C connector. Its compact dimensions, exposed GPIO pins, and extensive expansion capabilities make it suitable for IoT projects, automation systems, wearable devices, and embedded applications. M5Stack C008

zł52.90
24h
Available quantity: 22
Available

A compact development platform based on the dual-core ESP32-S3 processor, designed for prototyping embedded systems and IoT projects. The device features a 1.14-inch LCD display, a 56-key keyboard, and extensive audio features with a microphone, speaker, and headphone jack. A built-in accelerometer, IR emitter, microSD slot, and Grove connectors enable easy expansion and integration with sensors. Powered by a 1750 mAh Li-ion battery, it offers portability and long battery life. M5Stack K132-Adv

zł183.87
24h
Available quantity: 20
Available

Compact LoRa communication module for Meshtastic networks and custom radio applications, equipped with an ESP32-C6 microcontroller, SX1262 transceiver and 0.66" monochrome OLED display. It supports the 868-923 MHz frequency range and 2.4 GHz WiFi 6, and also includes a buzzer, programmable RGB LED, user button and HY2.0-4P expansion connector. M5Stack U202 Unit C6L

zł132.18
24h
Available quantity: 16
Available

Miniature, multifunctional controller based on ESP32-S3 with WiFi, color IPS display and 9-axis sensors, designed for compact IoT and educational projects. With rich interface options and improved connectivity, it is an ideal solution for embedded applications and wireless control. M5stack C126

zł102.90
24h
Available quantity: 10
Available
M5StickC Plus SE - Mini IoT Development Kit with ESP32-PICO-D4
  • New

Compact IoT development platform with an ESP32-PICO-D4 module, 1.14" color TFT display, 2.4 GHz WiFi connectivity and a built-in 120 mAh battery. The design integrates an infrared transmitter, microphone, RTC, buzzer, programmable buttons, and HY2.0-4P and Hat-Bus interfaces, making it suitable for compact IoT controllers, wearable devices and simple home automation terminals. M5Stack K016-P-SE

zł101.30
24h
Available quantity: 10
Available

Programmable IoT module for voice control and audio interaction projects, based on ESP32-S3 with Wi-Fi2.4GHz, 8MB Flash and 8MB PSRAM, featuring audio codec, MEMS microphone and audio amplifier. M5Stack C126-ECHO

zł83.76
24h
Available quantity: 9
Available

M5Stack C125 is a compact evaluation board with a transceiver supporting WiFi 802.11 b/g/n and Bluetooth 5.x in the 2.4 GHz band, ideal for prototyping IoT applications and remote communication. Thanks to the built-in antenna, it provides a stable signal, and its small size makes it easy to integrate with various systems.

zł39.00
24h
Available quantity: 8
Available

A module with a 433 MHz radio transmitter for the M5Stack sets. Based on the SYN115 chip, it has a built-in PCB antenna. M5Stack U114

zł26.26
24h
Available quantity: 8
Available

The ESP32-H2 Gateway Unit with ZigBee, Thread, and Matter support enables the development of energy-efficient IoT applications and the integration of intelligent systems. Designed to operate as a gateway or end node in wireless networks based on the IEEE 802.15.4 standard. M5Stack U195

zł36.78
24h
Available quantity: 7
Available

Advanced programmable logic controller (PLC) based on ESP32-S3, designed for industrial, automation and remote monitoring applications. It offers 8 optically isolated digital inputs, 4 relay outputs, PWR-CAN and PWR-485 interfaces and the ability to communicate with the EZDATA cloud. With wide power supply options, display, sensors and easy integration with Grove sensors, it is a comprehensive solution for IoT and automation systems. M5Stack K141

zł238.58
24h
Available quantity: 4
Available

Universal module for prototyping. It has 70 prototype fields with a diameter of 1 mm and a race of 2.54 mm and a Grove connector. M5Stack Proto Unit

zł12.20
24h
Available quantity: 4
Available

The M5Stack K125 AtomS3U is a development kit based on the Xtensa LX7 dual-core processor clocked at 240 MHz, with the ESP32-S3 chip offering computing power and Wi-Fi connectivity. Equipped with a USB-A connector with OTG function, a Grove connector and a 6-pin 2.54 mm connector, it allows for extensive integration with sensors and modules, and also has built-in peripherals such as a 1PDM microphone, IR diode and RGB diode

zł69.90
24h
Available quantity: 4
Available

IoT development terminal equipped with an ESP32-P4 microcontroller, a 5″ 1280×720 IPS touchscreen, an ESP32-C6 Wi-Fi 6 module and a 2 MP camera. The device provides an RS-485 interface, USB ports and expansion connectors enabling integration with IoT systems, industrial automation and edge computing applications. M5Stack C145

zł305.48
24h
Available quantity: 4
Available

Efficient and Versatile M5Stack Controllers

M5Stack controllers are compact and efficient devices that enable the execution of advanced IoT projects. Equipped with modern features, they support programming and integration with various peripheral modules, making them perfect for creating intelligent systems and applications.

Peripheral Modules for Expanding Capabilities

M5Stack peripheral modules offer extensive possibilities for project expansion. Available options include camera modules with sensors for monitoring and air quality sensor modules for environmental analysis. These modules are easy to integrate and ideal for various technological applications.

Development Kits for Rapid Prototyping

M5Stack development kits are comprehensive solutions that enable quick and efficient prototyping. Equipped with various components, these kits are perfect for engineers and electronics enthusiasts who want to quickly test their ideas and turn them into working projects.

M5Stack Product Range at Kamami

The Kamami store offers a wide selection of M5Stack products, including controllers, peripheral modules, and development kits. With high-quality components, every electronics enthusiast will find products here to help realize even the most demanding projects.