Portable game console based on Raspberry Pi CM3+ Lite, equipped with LCD...
Multifunctional robot with 2WD chassis and controller in the form of a...
Base board prepared for Rasberry Pi CM4 modules. It integrates the PoE...
Metal case designed for the Raspberry Pi CM4 IO Board. It has holes for...
PCIe to M.2 connector adapter designed to work with Raspberry Pi CM4...
E-Paper display with a diagonal of 7.5" and a resolution of 800x480 px...
3-color e-Paper display with a diagonal of 1.54" and a resolution of...
V4 features the same sensors as v3 (L3GD20H, LSM303D) and adds an LPS25H digital barometer. An I²C interface accesses 10 independent measurements that can be used to calculate the sensor’s altitude and absolute orientation.
Inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. Pololu 2739
Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. Adafruit 1247
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
Wireless motion sensor, temperature and magnetic field with built-in event memory (recorder)
Wireless sensor containing a precise accelerometer and magnetometer (electronic compass) with built-in event memory (recorder)
Wireless sensor containing a precise accelerometer and magnetometer (electronic compass) with built-in event memory (recorder)
Wireless motion sensor and magnetic field with built-in event memory (recorder)
Wireless motion sensor and magnetic field with built-in event memory (recorder)
KAmodLSM303 is a module that allows you to measure the acceleration and the value of the magnetic field.
KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes
KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems
KAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC
Pololu 2127