USB-RS485 converter for industrial applications. It provides communication between the USB interface and the RS485 serial standard. Waveshare USB TO RS485

Simulation set for Siemens S7-1200 PLC devices. Using this set, it is possible to verify the operation of a program written for a PLC by applying the appropriate states to the digital inputs, to the analogue (ADC) inputs voltages from the built-in or external sensors. LED status monitoring is possible

USB-RS485 converter for industrial applications. It provides communication between the USB interface and the RS485 serial standard. Waveshare USB TO RS485 (B)

Industrial RS485-Ethernet converter that provides easy communication between the RS485 and RJ45 Ethernet interface. Mounted on an industrial rail. Waveshare RS485 TO ETH (B)

Mean Well HDR-15-24 power supply with 15 W power and 24 V DC output mounted on a DIN rail offers high reliability and a wide range of input voltages. It is suitable for automation systems, industrial installations, and low-voltage distribution boards.

Industrial RS485 to Ethernet converter equipped with PoE power support compliant with the IEEE 802.3af/at standard. The device enables integration of RS485-based systems with Ethernet networks, offering data transmission up to 1 Mbps, TCP and UDP communication, 1 kV galvanic isolation, and configuration through a built-in web interface. PoE support allows both power and data to be delivered through a single network cable. MODIG MD12003

Miniature industrial RS485 to Ethernet converter designed for integrating RS485-based devices with Ethernet networks. The device supports RS485 communication up to 1 Mbps, TCP and UDP networking, 1 kV galvanic isolation, and configuration through a built-in web interface. Its compact enclosure allows installation as a permanent system component or use as a portable device. MODIG MD12001

KAmod DMX512 is a DMX signal converter that enables communication between a computer and a stage lighting system. It is equipped with full galvanic isolation, supports up to 512 devices, has a transmission range of 1200 m, is powered via a USB-C port, and is compatible with various programs, making it ideal for professional use in theaters, clubs, and concerts

Industrial RS485 to USB converter featuring 1 kV galvanic isolation, a USB-C interface, and an FTDI FT230 controller. The device enables communication between a computer and RS485-based equipment, offering data rates up to 1 Mbps, support for up to 64 nodes, surge protection, and a configurable 120 Ω termination resistor. MODIG MD11001

Isolated USB converter for industrial applications. It provides communication between the USB interface and the RS485 and RS422 serial standard. Waveshare USB TO RS485/422

USR-DR164 is a compact RS485 ↔ WiFi converter supporting 2.4 GHz and 5.8 GHz bands with Modbus Gateway functionality, enabling easy integration of industrial devices with IoT networks and SCADA/PLC systems. Thanks to its robust industrial design, wide voltage and operating temperature range, and flexible configuration, it is suitable for industrial automation, smart buildings, energy, and logistics applications.

KA-LOGO! -IO-Simulator is a simulation set for the Siemens LOGO logic controller! 8. Using this set, it is possible to simulate individual bits at the controller inputs as well as using the ADC converter embedded in the controller. In addition, the module with LEDs allows signaling of states on four outputs of the logic controller

Industrial RS485 to Ethernet converter designed for installation on a 35 mm DIN rail. The device enables integration of RS485-based systems with Ethernet networks, offering data transmission up to 1 Mbps, TCP and UDP communication, 1 kV galvanic isolation, and configuration through a built-in web interface. The compact 35 mm wide enclosure allows convenient installation in control cabinets and electrical distribution panels. MODIG MD12002

USB - RS232/RS485 converter with the original FT2132RNL chip. It uses a USB type A connector and a screw connector to connect RS232 and RS485 interfaces. Supports a wide range of operating systems: Mac, Linux, Android and Windows 11, 10, 8.1, 8, 7. Waveshare USB TO RS232/485

Converter that provides easy communication between the RS485 and RJ45 Ethernet interface. Configurable via web page or AT commands. USR-DR302

Converter that provides easy communication between the RS485 and RJ45 Ethernet interface. Configurable via web page or AT commands. USR-TCP232-304

RS232/RS485-WiFi converter that provides easy communication between the RS232 or RS485 interface and the WiFi wireless network. Supports the Modbus RTU protocol

Converter dedicated to industrial applications. It provides communication between the USB interface and the RS485 serial standard

Converter that provides easy communication between RS232 and RS485 interfaces and RJ45 Ethernet. Configured via web page or AT commands. Supports the Modbus RTU and Modbus TCP protocols. USR-TCP232-410S

USR-DR162 is an industrial RS232 to WiFi converter supporting 2.4 GHz and 5.8 GHz bands, providing transparent data transmission from serial devices to a wireless network. An integrated Modbus gateway and broad support for communication protocols enable integration with SCADA systems, HMIs, and industrial cloud platforms. Its compact size and resistance to harsh environmental conditions make it suitable for applications with limited installation space, such as factory automation, smart warehouses, or mobile installations.