.png)
Category: A/D and D/A converters
ADC and DAC Converters: Essential Components of Modern Electronics
Analog-to-digital (ADC) and digital-to-analog (DAC) converters are key elements in modern electronic systems, enabling the conversion of analog signals to digital and vice versa. Our offering includes a wide range of converters and converter modules that meet the needs of both hobbyists and professionals. From modules with touch panel controllers and converters with headphone amplifiers to audio modules with converters – there is something for everyone. These converters are essential in applications such as voltage and current monitoring for Raspberry Pi, allowing precise control and monitoring in various projects. With our advanced solutions, your systems will be able to operate more efficiently and accurately.
There are 64 products.
I2S digital-to-analog converter based on the PCM5122, offering high-quality stereo line-level output, hardware mode operation and optional configuration via I2C or SPI, designed for microcontrollers and Raspberry Pi. Adafruit 6421
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication
Module with 8 voltage analog outputs with a range from 0 to 10 V. It communicates via the RS485 interface and supports communication within the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH (B)
High-quality digital-to-analog converter that allows for pure stereo audio playback without the need for I2C configuration or the MCLK pin. It supports I2S signals (BCLK, WSEL, DIN) and audio formats up to 32 bits and 384 kHz, providing an excellent signal-to-noise ratio (112 dB). Audio output is available via a 3.5 mm jack or on-board pads, and the module works best as a line output to amplifiers and audio systems. Adafruit 6250
Module with 8-bit ADC and 8-bit DAC. It allows you to measure voltage and generate an analog signal. Communicates via I2C
Gravity module designed based on the GP8211 system. It is a single-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.01%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1071
The Adafruit 5974 module with the HX711 converter enables precise reading of signals from strain gauges and load cells based on a Wheatstone bridge, offering 24-bit resolution and selectable gain. With an integrated screw terminal and options for sampling rate and channel configuration, it is used in projects involving force, pressure, or weight measurement in IoT systems, electronic scales, and mechanical testing.
ADC converter module with 7 measurement channels (measuring 0-5V, 0-10V voltage and 4-20 mA current). Communicates via RS485 industrial interface using Modbus RTU protocol. R4AVA07
Gravity module designed based on the GP8413 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.2%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1073
Gravity module designed based on the GP8101S system. It is a single-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.2% accuracy. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1036
Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553
Miniature USB DAC with the PCM2704 chip enables conversion of a digital audio signal to analog with high quality and low distortion. Powered from the USB port, it works with Windows, MacOS and Android OTG systems, offering analog and SPDIF outputs for HIFI and mobile audio applications.
DFRobot DFR1184 module with a 15-bit ADS1115 converter enables precise voltage measurements of 0–10 V from industrial sensors. The dual-channel design, support for I2C/UART, and compatibility with popular platforms make it an effective solution for automation systems, environmental monitoring, and energy management.
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for single signals and differential signals with 12-bit resolution. I2C communication
12-bit ADS1015 analog-to-digital converter module with four single-ended inputs or two differential inputs. It communicates via I2C, supports conversion rates up to 3.3kSPS, and features a programmable gain amplifier (PGA). Designed for analog signal acquisition in microcontroller-based systems. Soldered 333094
Module with 4-channel ADC ADS1115 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1085
Dual-channel GP8403 DAC breakout with 12-bit resolution and two independent 0–5V or 0–10V analog outputs controlled over I2C. The board includes a 12V / 100mA boost output, non-volatile memory, STEMMA QT / Qwiic connectors and support for 3.3V and 5V logic. Adafruit 6516
A module with a 3-channel ADC ADC ADS1015, which allows you to read voltages from -24 V to +24 V with a sampling frequency of up to 3.3 kHz and a resolution of 12 bits. Pimoroni PIM422
Functionality and Applications of Converters
Analog-to-digital (ADC) converters transform analog signals into digital ones, which is essential in modern systems where precise monitoring and data analysis are required. Converter modules allow the integration of these components into various applications, from audio systems to advanced measurement setups. These converters are ideal for use in home automation, medicine, telecommunications, and many other fields where accuracy and reliability are crucial.
Specialized Modules
Our offer also includes converter modules equipped with additional features, such as touch panel controllers. These modules make it possible to create interactive control systems that are intuitive and easy to use. They are indispensable in modern multimedia applications where user comfort and precision are important. Another example is converters with headphone amplifiers, which provide excellent sound quality in audio devices.
Advanced Audio Modules and Monitoring
For audio enthusiasts, we have prepared audio modules with converters that allow precise conversion of digital signals to analog, which is crucial in high-quality audio systems. These modules are ideal for use in hi-fi systems, musical equipment, and professional recording studios. Additionally, we offer solutions for voltage and current monitoring for Raspberry Pi, allowing precise control of electrical parameters in various projects, increasing their efficiency and safety. By investing in our converters, you gain access to the latest technologies that will enhance the quality and efficiency of your systems.