Module with 4-channel ADC 16-bit ADS1115 converter
ID: 587532
5906623464197
zł14.16
Tax included
zł11.51 tax excl.
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication
Description
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion with 16-bit resolution for both single and differential signals. It has a programmable gain value built in, so it can measure small voltage changes. The system has the possibility of sampling with a frequency of up to 860 Hz with an input voltage ranging from ± 256 mV to ± 6.114 V. Communication takes place via the I2C interface, the address of which can be modified using the ADDR pin. The user also has an interrupt output that allows the converter to be configured to generate a signal for a specific event.
Features
- Working modes: single conversion, continuous conversion
- Measurement type: single signal, differential signal
- Input voltage range: GND to VDD
- FSR: ± 0.256V to ± 6.114V (Default: 2.048V)
- Resolution: 16-bit
- Sampling frequency: 8 Hz to 860 Hz
- I2C communication
- I2C addresses: 0x48, 0x49, 0x4A, 0x4B
- Voltage (VDD): 2V to 5.5V
- Current consumption: 150 μA
- Working temperature: from -40°C to 125°C
Kit contains
- ADC ADS1115 converter module
- 10-pin straight male goldpin connector
587532
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553
zł72.56
24h
Available quantity: 4
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
24h
Available quantity: 201
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
Delivery date unknown
No product available!
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 12
Available
Module with 4-channel ADC ADS1015 converter. The system enables analog voltage conversion for single signals and differential signals with 12-bit resolution. I2C communication
zł18.52
24h
Available quantity: 2
Available
Other products in the same category (16)
Gravity module designed based on the GP8501 system. It is a two-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.5% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1037
zł42.46
24h
Available quantity: 3
Available
DAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972
zł50.28
24h
Available quantity: 5
Available
8-channel module with current analog outputs ranging from 0 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH
zł88.41
4 weeks
No product available!
DFRobot DFR1184 module with a 15-bit ADS1115 converter enables precise voltage measurements of 0–10 V from industrial sensors. The dual-channel design, support for I2C/UART, and compatibility with popular platforms make it an effective solution for automation systems, environmental monitoring, and energy management.
zł56.40
24h
Available quantity: 2
Available
3-channel voltage and current monitoring module designed to work with the Raspberry Pi. It can measure voltage ranging from 0 to 26 V and voltage ± 3.2 A. SB Components 20805
zł93.81
24h
Available quantity: 2
Available
ADC converter module with 7 measurement channels (measuring 0-5V, 0-10V voltage and 4-20 mA current). Communicates via RS485 industrial interface using Modbus RTU protocol. R4AVA07
zł40.52
4 weeks
No product available!
A module with a 24-bit ADC converter HX711, which enables reading data from strain gauges and scales. The board is equipped with a Grove connector and communicates via a serial interface. Seeed Studio 101020712
zł19.10
24h
Available quantity: 2
Available
The sound card in the form of a module with a USB type B socket. It uses the ES9018K2M DAC converter, has a 3.5 mm jack audio output and two RCA connectors
zł126.71
4 weeks
No product available!
Gravity module designed based on the GP8101S system. It is a single-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.2% accuracy. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1036
zł37.07
24h
Available quantity: 3
Available
Module with 8-bit ADC and 8-bit DAC. It allows you to measure voltage and generate an analog signal. Communicates via I2C. Adafruit 4648
zł33.59
24h
Available quantity: 2
Available
Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)
zł1,344.41
3 weeks
No product available!
Module with 8 voltage analog outputs with a range from 0 to 10 V. It communicates via the RS485 interface and supports communication within the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Output 8CH (B)
zł89.73
4 weeks
No product available!
Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553
zł72.56
24h
Available quantity: 4
Available
A module with a stereo DAC converter based on the UDA1334A chip. It can generate a signal with a resolution of 16, 20 or 24 bits. It communicates via the I2S interface. Adafruit 4037
zł70.16
4 weeks
No product available!
Module with 4-channel 12-bit DAC MCP4728 converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 4470
zł38.62
24h
Available quantity: 3
Available
12-bit DAC converter module designed to work with the M5Stack sets. It enables the conversion of digital signals into an analog signal. M5Stack DAC Unit
zł38.90
24h
Available quantity: 3
Available
Module with 4-channel ADC ADS1115 converter. The system enables analog voltage conversion for single signals and differential signals with 16-bit resolution. I2C communication