Category: Hall sensors

Hall sensor module. It has a digital output on the XH2.54 connector

This module can be applied to motor speed measurement, objective position detection, smart car, electronic building blocks, etc.

Module with Hall sensor, allows for magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Gravity standard. DFRobot SEN0185

Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038

The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046

Module with a matrix of 64 Hall sensors, which enables the conversion of magnetic fields into a visual spectrum. SparkFun SPX-14652

Module with hall sensor A3144, analog and digital output from comparator, RoHS

Module with three Hall sensors A3144E, which react to the failure of the magnet. It is powered with 5 V and has a digital output on the Grove connector. M5Stack U084

The module with A3244 Hall sensor and comparator allows you to detect the presence of a magnetic field. It can be used for applications such as rotation detection, position monitoring and alarm systems