Qwiic Mini Linear 3D Hall-Effect Sensor - module with TMAG5273 sensor

Module with hall sensor A3144, analog and digital output from comparator, RoHS

Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038

Module with Hall sensor, allows for magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Gravity standard. DFRobot SEN0185

TMAG5273 Hall sensor module dedicated to detecting the presence, strength and direction of a magnetic field in three dimensions. It uses communication via the I2C interface and Qwiic connectors. SparkFun SEN-23880

The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046

The module with A3244 Hall sensor and comparator allows you to detect the presence of a magnetic field. It can be used for applications such as rotation detection, position monitoring and alarm systems

Module with three Hall sensors A3144E, which react to the failure of the magnet. It is powered with 5 V and has a digital output on the Grove connector. M5Stack U084

This module can be applied to motor speed measurement, objective position detection, smart car, electronic building blocks, etc.

Module with a matrix of 64 Hall sensors, which enables the conversion of magnetic fields into a visual spectrum. SparkFun SPX-14652

Hall sensor module. It has a digital output on the XH2.54 connector