100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 1.14 mm

Raspberry Pi Pico 2, based on the RP2350 microcontroller, using the application and functional applications of the Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security function, including Arm TrustZone. It is hardware and software with a connected model, which provides an attractive operation for enthusiasts and specialists in systems used

Raspberry Pi Pico 2W, based on the RP2350 microcontroller and has a built-in WiFi and Bluetooth communication module. Pi Pico 2W offers significantly increased performance and functionality thanks to the use of Cortex M33 and RISC-V cores, doubled SRAM memory and advanced security features, including Arm TrustZone. It is hardware and software compatible with previous models, making it an attractive choice for enthusiasts and professionals in the field of embedded systems

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. In addition, the board is equipped with the Infineon CYW43439 system, extending the board with wireless connectivity. Raspberry Pi SC0918

Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico

100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 2.9 mm

A miniature version of the Raspberry Pi computer, equipped with a 1 GHz processor, 512 MB of RAM and WiFi and Bluetooth 4.1 wireless connectivity with BLE support. Raspberry Pi SC0020

Adapter that allows you to connect the HDMI cable to the Raspberry Pi Zero 2 W

100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height

Miniature version of the Raspberry Pi computer equipped with SiP BCM2710A1 - 4x ARM Cortex-A53 1GHz twin with Raspberry Pi 3 and 512 MB of RAM and wireless connectivity WiFi 802.11 b / g / n + Bluetooth 4.2 / BLE

Threaded hexagon spacer M2,5, sleeve length 11mm, female-female. The sleeve is made of brass

KAmodCSIextender modules are designed to work with Raspberry Pi cameras. KAmodCSIextender allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters).

Universal board equipped with a metalized hole grid with a pitch of 2.54 mm, enabling mounting using goldpin strips or directly on the surface, with markings facilitating the identification of signals

Flex Cable for Raspberry Pi Camera - 100mm / 4"

3in1 case designed for Raspberry Pi Zero 2. The set includes three top panels - full, with a cutout for a 40-pin GPIO connector and with hole for the camera. Made of plastic. The housing has non-slip feet

A tape enabling the connection of camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Raspberry Pi SC1128

A tape enabling the connection of a DSI display with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on a Raspberry Pi 5 computer. Raspberry Pi SC1133

The cooling kit is designed to be installed in the official case for Raspberry Pi 4 model B. The kit includes a fan powered and controlled from the minicomputer level, a heat sink for mounting on the processor and a fan holder. Raspberry Pi 4 Case Fan

Threaded hexagon spacer M2,5, sleeve length 14mm, female-female. The sleeve is made of brass

Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917