Heat sink designed for mounting on Raspberry Pi CM4 modules. It is compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board.

The heat sink ensures proper cooling of the CM4 module. Fastening is done by means of 4 mounting holes and screws, and the design provides easy access to the CM4 antenna connector and does not make working with the module in any way difficult.

Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM. Raspberry Pi CM4001000
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 8 GB eMMC. Raspberry Pi CM4001008
No product available!
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 16 GB eMMC. Raspberry Pi CM4001016
SoM Raspberry Pi CM4 with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and 32 GB eMMC. Raspberry Pi CM4001032
No product available!
Base board prepared for Rasberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is an RTC system and a fan connector. Waveshare Compute Module 4 PoE Board
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-12V
CMX-ADAPTER is a protection board dedicated to Raspberry Pi CM4 and CM5 modules, designed for intensive use and repeated connection with base expansion boards. It facilitates integration and protects connectors from mechanical damage.
Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-B
A 13.3-inch screen with a capacitive touch panel dedicated to the Raspberry Pi CM4. It can be used not only as an ordinary mirror, but also as a convenient computer. Waveshare 13.3inch Magic Mirror C4
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal casing with a fan, a power supply and a base plate. It has the function of a UPS. Waveshare CM4-POE-UPS-BOX (EU)
The Raspberry Pi Cooler is an essential accessory for anyone who wants to ensure optimal operating conditions for the Raspberry Pi Compute Module 5. Efficient passive cooling effectively reduces the operating temperature of the module, which is crucial for ensuring reliability and long-term stability of the system. With this heatsink, users can fully utilize the capabilities of their Raspberry Pi Compute Module 5 without worrying about overheating and the associated reduction in performance
No product available!
CM5-IO-BASE-BOX-B (EU) is a complete hardware platform for the Raspberry Pi Compute Module 5, including a base board, a metal enclosure with ventilation holes and a fan, and a 27 W power supply. It supports advanced features such as dual 4K output, high-speed data transfer via USB 3.2, and network connectivity via Gigabit Ethernet. With MIPI, GPIO, M.2, and TF connectors, as well as wall or DIN rail mounting options, it is suitable for embedded projects, industrial systems, and edge computing solutions. Raspberry Pi Compute Module 5 not included.
No product available!
A base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, three USB 2.0, HDMI, DSI and CSI. In addition, the board includes an RTC chip and a fan connector. Waveshare CM4-DUAL-ETH-WIFI6-BASE
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°. ArduCAM B006604
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Mini Base Board (A) and a USB HDMI to FCC adapter. Waveshare CM4-IO-BASE-Acce C
A base board dedicated to Raspberry Pi CM4 modules. It is equipped with connectors for all available interfaces, in addition there is an RTC chip on the board Grove ports dedicated to the connection of external expansion modules. Cytron CM4 Maker Board
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a router. Seeed Studio 103110042
No product available!
Adapter with a set of connectors specific to the Raspberry Pi 3 Model B/B+. It allows you to adapt the Raspberry Pi CM4 modules to projects based on Pi 3 model B/B+. Waveshare CM4-to-Pi3-Adapter-B
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Interface expander included. Waveshare CM4-DUAL-CAMERA-BASE-Acce-A
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Dual Gigabit Ethernet 5G/4G Base Board. Waveshare CM4-DUAL-ETH-4G/5G-BOX-EU
The Raspberry Pi Development Kit for Compute Module 5 is a complete kit for prototyping embedded applications, including the Compute Module 5 Wireless, an IO Board, and accessories such as a case, cooling, and power supply. Thanks to its versatility and rich equipment, the kit allows you to quickly start working on advanced projects
Base board for Raspberry Pi CM4. It allows you to add 4G, 5G or LoRa communication via the M.2 B Key or Mini-PCIe connector. Comes with 4G SIM7600G-H-PCIE module. Waveshare CM4-IO-WIRELESS-BASE-Acce-A-EU
Heatsink designed for mounting on Raspberry Pi CM4 modules. Komaptybilny with base boards Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-HEATSINK