zł194.70 tax excl.
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with RJ45, USB 3.2, HDMI, DSI, CSI connectors and M.2 B KEY socket for the 4G/5G module. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-4G/5G-BASE
Dual Gigabit Ethernet 5G/4G Base Board is a base board for Raspberry Pi CM4 modules. It is equipped with special connectors for connecting the CM4 module and the outputs of all interfaces, including two USB 3.2 Gen1 connectors, two RJ45 Ethernet, two HDMI, DSI, two CSI and a 40-Pin GPIO connector compatible with HAT modules. The board has an M.2 B Key connector that allows you to add a module for communication with the 4G/5G network and a real time clock system (RTC), a micro SD card slot, nanoSIM cards and a fan connector. Full documentation is available on the product Wiki page.

Manufacturer
Responsible person
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM. Raspberry Pi CM4001000
No product available!
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 1 GB LPDDR4 RAM and wireless connectivity. Raspberry Pi CM4101000
SoM Raspberry Pi CM4 Lite with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5 GHz, 4 GB LPDDR4 RAM. Raspberry Pi CM4004000
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal housing with a fan, a power supply and a Dual Gigabit Ethernet 5G/4G Base Board. Waveshare CM4-DUAL-ETH-4G/5G-BOX-EU
Base board prepared for Raspberry Pi CM4 modules. It integrates the PoE circuit, it is equipped with connectors for all available interfaces, additionally on the board there is a RTC system and a fan connector. Waveshare Compute Module 4 PoE Board (B)
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, three USB 3.2, HDMI, DSI and CSI. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-BASE
Adapter with USB and HDMI connectors connected via FFC tape, among others for CM4-IO-BASE base plates. Waveshare USB HDMI Adapter
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 160°. ArduCAM B006605
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°. ArduCAM B006604
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 72°. ArduCAM B006603
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It integrates the PoE circuit, is equipped with an M.2 connector for connecting a 5G / 4G module and isolated industrial RS232, RS485 and CAN interfaces. Waveshare Compute Module 4 PoE 4G Board
Portable game console based on the Raspberry Pi CM4 Lite, equipped with a 2.8" IPS LCD display, battery and speaker. Waveshare GPM28040
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with RJ45, USB 3.2, HDMI, DSI, CSI connectors and M.2 B KEY socket for the 4G/5G module. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-4G/5G-BASE
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Interface expander included. Waveshare CM4-DUAL-CAMERA-BASE-Acce-A
No product available!
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two cameras with an IMX219 sensor with a resolution of 8 MP. Waveshare CM4-DUAL-CAMERA-BASE
A set with IoT Router Carrier Board Mini and PiTray Mini base boards and a housing dedicated to Raspberry Pi CM4 modules. DFRobot DFR0767-2
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a router. Seeed Studio 103110042
No product available!
Screen with a capacitive touch panel dedicated to the Raspberry Pi CM4. It can be used not only as an ordinary mirror, but also as a convenient computer for browsing the Internet or playing multimedia files. Waveshare 13.3inch Magic Mirror C4 (EU)
Base board dedicated to the Raspberry Pi CM4. It has the dimensions of a CM4 module and is equipped with basic connectors for interfaces. Waveshare CM4-NANO-A
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two RJ45 connectors, two USB 2.0, HDMI, four RS485 and CSI. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-ETH-RS485-BASE-B
Base board dedicated to Raspberry Pi CM4 modules. It is equipped with RJ45, USB 3.2, HDMI, DSI, CSI connectors and M.2 B KEY socket for the 4G/5G module. Additionally, the board has an RTC system and a fan connector. Waveshare CM4-DUAL-ETH-4G/5G-BASE