Category: Adapters and other accessories
Adapters and Other Accessories - Enhance Your Segger Programmers
Adapters and accessories are essential elements that extend the functionality of Segger programmers, allowing their flexible use in various projects. With the right accessories, such as cables, adapters, and isolators, it is possible to easily connect programmers to different types of microcontrollers and ensure safe and reliable operation. Our offer includes a wide range of products that will meet the needs of both amateurs and professionals.
There are 60 products.
10-wire ribbon cable (1.27mm to 2.54mm) for Segger J-Link EDU mini
J-Link Needle Adapter - connect J-Link to a PCB, Segger
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
J-Link 19-pin Cortex-M Adapter, RoHS, Segger
J-Link 9-pin Cortex-M Adapter, RoHS, Segger
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
The Segger J-Link Supply Adapter (8.06.14) allows you to manually set the debug probe I/O voltage, preventing damage to the target board, adjustable from 1.2V to 5.0V. It can be inserted between J-Link or Flasher and the target device, reducing the number of connections needed, which is especially useful in a production environment.
Segger adapter 8.06.28 allows conversion from a 20-pin 0.1" connector to a 10-pin 0.05" Cortex-M type connector with the option of custom pin mapping. A useful solution for integrating programmers and debuggers with devices featuring different pin configurations.
A device that provides electrical isolation between the J-Trace emulator and the ARM board, which protects against electrical interference, especially in systems where the development tools and the application do not share the same ground. It provides 1 kV DC isolation, supports trace frequencies up to 75 MHz, and is compatible with J-Trace V2 and later versions, with a minimum power consumption of 25 µA. Segger J-Trace Isolator (07/08/10)
A power adapter that provides a stabilized supply voltage to the target board (can be adjusted from 3.6V to 0.8V). Segger Target Supply Adapter (8.06.18)
The Segger J-Link Microchip Adapter (8/06/09) provides a debug connection between a J-Link probe and hardware with Microchip PIC32 series microcontrollers. Supports RJ12 debug connector, 14-pin MIPS connector and 6-pin PICkit connector.
Segger Arduino MKR adapter (8.06.37) with 6-pin 0.05" and 20-pin JTAG connectors, designed for connecting Segger programmers and debuggers, enables efficient programming and testing of Arduino MKR boards.
J-Link 14-pin TI Adapter, RoHS, Segger
J-Link ARM-14 Adapter, RoHS
The Segger J-Link Measurement+Patch Adapter allows you to easily customize connections between J-Link or Flasher devices and boards that do not have a standard debug connector. It is equipped with colored wires for signal identification, test points and jumpers for adjusting the voltages on the pins.
No product available!
A compact reference platform that enables rapid testing and verification of trace configurations, providing excellent signal quality for analysis. With the ST STM32H743 microcontroller and support for JTAG, SWD and SWO debugging interfaces, the board provides high performance and flexibility in monitoring system performance. Segger STM32H7 Trace Reference Board (6.68.20)
No product available!
An adapter that allows the J-Link device to connect to Microchip microprocessors that use an RJ11 debug connector, converting the standard 20-pin .1" connector to a 6-pin RJ11 connector. With this tool, users can take full advantage of 2-wire JTAG debugging capabilities, including process tracing, memory analysis, and real-time device control, and the 21 cm RJ11 cable provides convenience in connecting to the target system. Segger Microchip 2-Wire JTAG TDI Adapter (06/08/23)
No product available!
Adapter enabling easy connection of a Microchip AVR microcontroller device with the SEGGER Flasher programming system, supporting 6-pin and 10-pin connectors and providing fast connection via SPI protocol. With the function of powering the target hardware (3.3V or 5V) and direct power supply via VTREF connection, the adapter is flexible, easy to use and ideal for programming and debugging AVR microcontrollers in embedded systems, providing reliable communication and high precision. Segger AVR SPI Adapter (8.06.25)
No product available!
A compact adapter that provides direct pin compatibility, allowing easy replacement of standard IDC cable without changing the pinout. It is designed to work with devices such as the J-Link PLUS Compact, J-Link BASE Compact and Flasher Compact, enabling flexible and efficient debugging and programming configurations in embedded systems. Segger Right Angle (RAFF) Adapter (8.06.32)
No product available!
Adapter enabling connection of OCDS DAP interface to systems based on Infineon Aurix™ TC2xx, TC3xx, TC4xx and C167 microcontrollers. Converts standard 20-pin SEGGER connector to 10-pin 0.05\'\' Samtec FTSH, providing stable and reliable communication in debugging and programming processes. Segger Infineon Aurix DAP-10 Adapter (8.06.38)
No product available!
IDC20 2.54 mm Pitch Cable for J-Link EDU mini Programmer
This cable is an indispensable accessory for every user of the J-Link EDU mini programmer. With an IDC20 2.54 mm pitch connector, it provides a stable and secure connection to programmed devices. The high quality of the cable ensures long-lasting use without connection issues.
Segger J-Link 9-pin Cortex-M (8.06.02) - Adapter for Cortex-M
The Segger J-Link 9-pin Cortex-M adapter is an ideal solution for those working with ARM Cortex-M microcontrollers. It allows easy and quick connection of the programmer to the target device, significantly simplifying the programming and debugging process.
Segger 50-Mil 10-Pin Patch Adapter (8.06.28) - 10-pin 1.27mm Connector Adapter
This adapter allows Segger programmers to connect to devices equipped with 10-pin 1.27mm connectors. It is an extremely useful tool for engineers working with various hardware platforms, offering flexibility and convenience in everyday work.
J-Link JTAG Isolator (8.07.00) - JTAG Isolator
The J-Link JTAG Isolator provides protection for devices and programmers from potential damage caused by voltage differences between different system segments. It is a key component in ensuring safe and reliable programming, especially in industrial and testing environments.
Segger J-Link ARM-14 (8.08.01) - Adapter for ARM 7/9/11
The Segger J-Link ARM-14 adapter is designed to work with ARM 7/9/11 microcontrollers. It allows easy and seamless connection of the programmer to the target device, significantly improving the programming and debugging process. With its solid construction and high-quality workmanship, this adapter is a reliable tool in the work of every engineer.
Offer at Kamami
In our online store Kamami, you will find a wide selection of adapters and accessories for Segger programmers. We offer competitive prices and professional technical advice. We guarantee fast and secure online shopping and after-sales support, so every customer can be sure they will receive a top-quality product and the necessary assistance in using it.