Order and pay in
for same day shipping
Set of M3 brass thread inserts in lengths from 3 to 12 mm. The set...
Set of M2, M2.5 and M3 brass threaded inserts in lengths of 3,4,5 and 6...
A set of goldpin connectors and contacts with a pitch of 2.54 mm. The...
Set of JST RCY connectors with 2 pins and pitch 2.54 mm. There are 50...
A set of JST-PH connectors and contacts with a pitch of 2.0 mm. The set...
DC motor equipped with a metal gear 1:90 with a cut shaft on both sides
Case for Arduino Mega2560, closed, with access to connectors, black
Conductive ITO coated glass. It has dimensions of 355.6x406.4 mm, a...
Evaluation kit with the i.MX 8M Mini 4-core application processor. The set is equipped with a WiFi and Bluetooth 4.1 module and has Ethernet, USB 3.0 and PCIe M.2 interface. NXP 8MMINID4-EVK
Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK
FRDM-K22F-AGM01 is a set of development plates containing a base plate and a board with a set of 9-axis sensors with an accelerometer, a gyroscope and a magnetometer. FRDM-K22F-AGM01
FRDM-K28F is a development board for Kinetis microcontrollers based on ARM Cortex-M4 with numerous peripherals including 6-axis digital accelerometer and magnetometer, USB interface, microSD card slot, three-color LED and two user buttons. FRDM-K28F
Development kit NXP with MIMXRT1021 processor and 256 MB RAM. The board has basic interfaces: Ethernet, USB, TF Card, CAN and Audio. NXP MIMXRT1020-EVK
QN9080-DK is a development kit with the NXP BLE SOC QN9080 chip. This system has an integrated 32-bit ARM Cortex-M4F core and a Bluetooth communication system (BLE v5.0). In addition to the board with the QN9080 chip, the set includes a USB dongle (also with the QN9080 chip) which suits the master / slave communication between the two QN9080 chips.
IMXRT1050-EVKB is an evaluation set from NXT with i.MX RT1050 ARM Cortex-M7 600 MHz processor, 256 MB SDRAM memory, USB Host and OTG connector, Ethernet interface and SD card slot. IMXRT1050-EVKB
9-axis expansion module with motion sensors. The module combines two integrated circuits: FXAS21002C 3-axis gyroscope and FXOS8700CQ 6-axis accelerometer/magnetometer. The board is equipped with connectors compatible with Arduino R3. NXP FRDM-STBC-AGM01
The development board FRDM-CR20A expansion board (shield) containing the wireless transmitter MCR20A 2.4 GHz, compatible with the existing development platforms Freedom - FRDM-K64F and FRDM-KL46Z. FRDM-CR20
Development kit based on the Arm Cortex-M4 32-bit microcontroller with a frequency of 180 MHz. The module has a built-in 2MB Flash memory, 256 KB SRAM, SDRAM controller, HS USB and Ethernet MAC. TWR-K65F180M
Development kit based on Vybrid® VF61NS151CMK50 processor equipped with two cores: Cortex-A5 with frequency 500 MHz and Cortex-M4 with frequency 167 MHz. The module has a built-in memory DDR3 128 MB and Flash 256 MB. TWR-VF65GS10
Evaluation kit with an i.MX 8M Nano quad-core processor, 2GB DDR4 RAM and 16GB eMMC 5.0/5.1 memory. Equipped with 802.11a/b/g/n/ac Wi-Fi module and BT4.1, MIPI-CSI and MIPI-DSI connector, audio Jack 3.5 mm, USB 3.0 and Ethernet. NXP NXP8MNANOD4-EVK
Module with a 4.3-inch LCD display for use with Freescale development kits. It is part of the Freescale Tower system. LCD TWR-LCD-RGB
The MIMXRT1062DVL6A Processor Evaluation Kit, which runs up to 600 MHz, has 256 MB of SDRAM, 512 MB of Flash and 64 QSPI Flash. NXP MIMXRT1060-EVK