QN9090-DK006 - development kit with QN9090 (T) Bluetooth LE 5.0 module

QN9080-DK is a development kit with the NXP BLE SOC QN9080 chip. This system has an integrated 32-bit ARM Cortex-M4F core and a Bluetooth communication system (BLE v5.0). In addition to the board with the QN9080 chip, the set includes a USB dongle (also with the QN9080 chip) which suits the master / slave communication between the two QN9080 chips.

Evaluation kit with an i.MX 8M Nano quad-core processor, 2GB DDR4 RAM and 16GB eMMC 5.0/5.1 memory. Equipped with 802.11a/b/g/n/ac Wi-Fi module and BT4.1, MIPI-CSI and MIPI-DSI connector, audio Jack 3.5 mm, USB 3.0 and Ethernet. NXP NXP8MNANOD4-EVK

Development kit based on Vybrid® VF61NS151CMK50 processor equipped with two cores: Cortex-A5 with frequency 500 MHz and Cortex-M4 with frequency 167 MHz. The module has a built-in memory DDR3 128 MB and Flash 256 MB. TWR-VF65GS10

Module with a 4.3-inch LCD display for use with Freescale development kits. It is part of the Freescale Tower system. LCD TWR-LCD-RGB

IMXRT1050-EVKB is an evaluation set from NXT with i.MX RT1050 ARM Cortex-M7 600 MHz processor, 256 MB SDRAM memory, USB Host and OTG connector, Ethernet interface and SD card slot. IMXRT1050-EVKB

LPCXpresso55S69 evaluation kit with LPC55S69 microcontroller with ARM Cortex-M33 core. The board contains a built-in debugging probe, audio subsystem and accelerometer, with the possibility of adding ready-made additional boards for connecting to the network, sensors, displays and other interfaces. NXP LPC55S69-EVK

Starter kit with MKE16Z64VLF4 microcontroller. The board has an RGB LED, a 6-axis IMU sensor (accelerometer and magnetometer), a 3-axis digital gyroscope, an ambient temperature sensor, a CAN interface and a capacitive touch panel. NXP FRDM-KE16Z

Evaluation kit i.MX RT1050, Cortex-M7, frequency 600 MHz, 256 MB SRAM, 512 MB Flash

Xplorer ++ Baseboard - development kit

LPCXpresso55S28 evaluation kit with LPC55S28 microcontroller with ARM Cortex-M33 core. The board contains a built-in LPC-Link2 programmer, audio subsystem, accelerometer, microSD slot, USB interfaces and expansion connectors. NXP LPC55S28-EVK

9-axis expansion module with motion sensors. The module combines two integrated circuits: FXAS21002C 3-axis gyroscope and FXOS8700CQ 6-axis accelerometer/magnetometer. The board is equipped with connectors compatible with Arduino R3. NXP FRDM-STBC-AGM01

FRDM-K22F-AGM01 is a set of development plates containing a base plate and a board with a set of 9-axis sensors with an accelerometer, a gyroscope and a magnetometer. FRDM-K22F-AGM01

A development board based on a dual-core Cortex-A55 processor and a supporting Cortex-M33, with an embedded Arm Ethos-U65 AI micro-accelerator for local data processing. It offers a rich set of interfaces (HDMI, MIPI DSI/CSI-2, USB, Ethernet, CAN), wireless connectivity (Wi-Fi 6, Bluetooth 5.4, Thread/Zigbee), and 2 GB LPDDR4X and 32 GB eMMC memory, enabling the rapid development of advanced IoT and edge AI applications. Linux and FreeRTOS support, EdgeLock® security features, the GoPoint platform, and an extensible architecture make it a complete prototyping and deployment tool. NXP FRDM-IMX93