Starter kit FRDM-HB2001-EVM with DC motor controller
ID: 572443
zł1,024.80
Tax included
zł833.17 tax excl.
Evaluation set FRDM-HB2001-EVM consisting of FRDM-KL25Z baseplate and extension board with DC motor controller MC33HB2001. NXP FRDM-HB2001-EVM
Description
The FRDM-HB2001-EVM Evaluation Kit combines the FRDM-KL25Z baseplate and the expansion board with the MC33HB2001 controller. The kit is an easy-to-use PCB that allows the user to use all the functions of the DC H-Bridge MC33HB2001 motor driver. The EVB parallel input can be easily monitored using laboratory equipment, any MCU with GPIO, as well as an FRDM-KL25Z board connected to the computer's USB port. The board also supports SPI communication to configure, control and monitor the status of MC33HB2001.
Features
FRDM-HB2001-EVM (motor controller MC33HB2001)
- Motor control with directional and speed / torque control
- Voltage suppression for handling transients at the system level
- Real-time power monitoring to implement closed-loop control
- Compatible with the NXP FRDM-KL25Z platform
- Built-in protection against reverse polarity of the battery
- Test points
- Built-in voltage regulator for supplying logic level circuits
- LEDs indicating the power status and direction of the motor
- A low ESR condenser that reduces ripple in the power supply
- Transient voltage suppressor for handling transients at the system level
- Continuous current 3 A (10 A at peak)
FRDM-KL25Z
- KL25Z128VLK4 - Cortex-M0 + MCU:
- Flash128 KB, 16 KB SRAM
- Rates up to 48 MHz
- Full Speed USB controller
- OpenSDA - USB debugging interface
- Tri-color LED
- Touch capacitive slider
- Freescale accelerometer MMA8451Q
- Flexible power options
- Power from the built-in USB connector
- Coin-cell battery socket (optional option)
- 5-9 V Vin with an optional IO connector
- 5 V for the optional IO connector
- 3.3V to or from the optional IO connector
- Reset button
Included
- FRDM-HB2001-EVM
- FRDM-KL25Z
572443
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Freescale starter kit with Kinetis KL25Z family microcontroller (Cortex-M0 +), integrated with the programmer-debugger OpenSDA, capacitive switch, LED-RGB and MEMS 3D accelerometer. Arduino-compatible outputs.
zł139.00
Delivery date unknown
No product available!
Freedom Development Platform for the Kinetis KL05 MCUs, Freescale, RoHS
zł93.30
24h
Available quantity: 1
Available
Freedom Development Platform for the Kinetis KL02 Family, Freescale, RoHS
zł134.61
24h
Available quantity: 1
Available
Starter kit with a microcontroller from the Kinetis KL46Z family (Cortex-M0 +), integrated with the OpenSDA programmer-debugger, capacitive touch slider, LED, MEMS 3D accelerometer and 4-digit LCD. NXP FRDM-KL46Z
zł269.84
24h
Available quantity: 4
Available
Starter kit with MKE16Z64VLF4 microcontroller. The board has an RGB LED, a 6-axis IMU sensor (accelerometer and magnetometer), a 3-axis digital gyroscope, an ambient temperature sensor, a CAN interface and a capacitive touch panel. NXP FRDM-KE16Z
zł123.00
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with a 4.3-inch LCD display for use with Freescale development kits. It is part of the Freescale Tower system. LCD TWR-LCD-RGB
zł1,344.96
24h
Available quantity: 1
Available
NXP MRB-KW019032EU is a modular set based on a 32-bit microcontroller with ARM Cortex M0 48 MHz core, equipped with an 868 MHz radio module. MRB-KW019032EU
zł827.48
24h
Available quantity: 1
Available
Compact development board based on the i.MX 91 processor, equipped with 1 GB LPDDR4 RAM, 8 GB eMMC and a rich set of interfaces such as USB-C, Ethernet, CAN, or a 40-pin connector. The integrated IW610 module enables communication via Wi-Fi 6, Bluetooth LE 5.4, Zigbee, Thread and Matter, making it ideal for modern IoT and industrial applications. Linux® support and support for debugging via SWD and UART make it a flexible and efficient tool for embedded system designers. NXP FRDM-IMX91
zł423.96
24h
Available quantity: 1
Available
9-axis expansion module with motion sensors. The module combines two integrated circuits: FXAS21002C 3-axis gyroscope and FXOS8700CQ 6-axis accelerometer/magnetometer. The board is equipped with connectors compatible with Arduino R3. NXP FRDM-STBC-AGM01
Regular pricezł69.00zł29.00
24h
Available quantity: 102
Available
The Freescale TWR-PROTO module expands the capabilities of the Tower system, allowing users to build and test their own circuits on a prototyping area. With full access to system bus signals, it is an ideal tool for experimenting, designing, and integrating custom hardware solutions.
zł146.36
6 weeks
No product available!
ARM mbed NXP LPC11U24 Development Board
zł250.48
24h
Available quantity: 1
Available
Development kit based on Vybrid® VF61NS151CMK50 processor equipped with two cores: Cortex-A5 with frequency 500 MHz and Cortex-M4 with frequency 167 MHz. The module has a built-in memory DDR3 128 MB and Flash 256 MB. TWR-VF65GS10
zł1,299.90
24h
Available quantity: 1
Available
Evaluation kit with an i.MX 8M Nano quad-core processor, 2GB DDR4 RAM and 16GB eMMC 5.0/5.1 memory. Equipped with 802.11a/b/g/n/ac Wi-Fi module and BT4.1, MIPI-CSI and MIPI-DSI connector, audio Jack 3.5 mm, USB 3.0 and Ethernet. NXP NXP8MNANOD4-EVK
Regular pricezł2,460.00zł1,999.00
24h
Available quantity: 4
Available
Development kit with QN9090 (T) Bluetooth LE 5.0 module complete with base board and expansion board. It is powered by the USB connector or from an external source via the DC connector. NXP QN9090-DK006
Regular pricezł805.96zł499.00
24h
Available quantity: 2
Available
The development board FRDM-CR20A expansion board (shield) containing the wireless transmitter MCR20A 2.4 GHz, compatible with the existing development platforms Freedom - FRDM-K64F and FRDM-KL46Z. FRDM-CR20
zł665.71
24h
Available quantity: 2
Available
MYD-LPC1850 Development Board
Regular pricezł731.76zł429.25
24h
Available quantity: 1
Available
Starter kit with MKE16Z64VLF4 microcontroller. The board has an RGB LED, a 6-axis IMU sensor (accelerometer and magnetometer), a 3-axis digital gyroscope, an ambient temperature sensor, a CAN interface and a capacitive touch panel. NXP FRDM-KE16Z
zł123.00
24h
Available quantity: 3
Available
Evaluation kit i.MX RT1050, Cortex-M7, frequency 600 MHz, 256 MB SRAM, 512 MB Flash
zł369.00
24h
Available quantity: 1
Available
FRDM-K22F-AGM01 is a set of development plates containing a base plate and a board with a set of 9-axis sensors with an accelerometer, a gyroscope and a magnetometer. FRDM-K22F-AGM01
zł376.38
4 weeks
No product available!
A development kit containing the A71CH Plug & Trust module, enabling easy and fast creation of secure IoT applications. NXP OM3710 / A71CHARD
zł481.75
6 weeks
No product available!
IMXRT1050-EVKB is an evaluation set from NXT with i.MX RT1050 ARM Cortex-M7 600 MHz processor, 256 MB SDRAM memory, USB Host and OTG connector, Ethernet interface and SD card slot. IMXRT1050-EVKB
zł430.50
24h
Available quantity: 1
Available
Evaluation set FRDM-HB2001-EVM consisting of FRDM-KL25Z baseplate and extension board with DC motor controller MC33HB2001. NXP FRDM-HB2001-EVM