Order and pay in
for same day shipping
Two-button module with 4 colored overlays. The board is equipped with a...
Grove vertical socket for surface mounting, 4-pin, pitch 2.0 mm. Set of...
A set with a radio transmitter and receiver operating at 315 MHz. The...
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped...
The module with an incremental encoder with channels A and B. The board...
Module with driver for 64x32 or 32x16 LED matrix displays. The board is...
Module with SHT31 temperature and humidity sensor. The board is equipped...
Gyroscopes are used to measure the angular velocity. Thanks to the gyroscope reading, you can detect and measure at what speed the device rotates.
V4 features the same sensors as v3 (L3GD20H, LSM303D) and adds an LPS25H digital barometer. An I²C interface accesses 10 independent measurements that can be used to calculate the sensor’s altitude and absolute orientation.
Inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. Pololu 2739
Accelerometer and gyroscope module, allows measurement of acceleration in the range of +/- 16 G and angular velocity in the range up to +/- 2000 dps. modMPU6500 (GY-6500)
Module with a 3-axis gyroscope (ITG 3200 system). The measuring range is ± 2000 ° / s. The I2C interface is used for communication. The module has a low power consumption (typically 6.5 mA). The module has a connector in accordance with the Grove standard. Seeed studio 101020050
Module with L3G4200D (3-axis gyroscope with digital output)
KAmodL3GD20 is a digital gyroscope module with L3GD20 chip. It make possible to measure angular velocity up to ± 2000 degrees per second. It has a embedded voltage regulator and level translators on SDA/SCL lines, thanks to which it can be used in systems supplied with a voltage of 2.5 V-5.5 V. KAmodL3GD20
The GY-87 module is composed of a module with MPU6050, QMC5883L and BMP180 sensors, allowing the measurement of traffic in nine axes and the measurement of atmospheric pressure. The module has a built-in 3.3 V voltage stabilizer
3-axis gyroscope module with L3G4200D system, equipped with I2C and SPI interfaces. Power supply with a voltage of 3..5 V, 2.54 mm straight and angled connectors included. GY-50
6DoF module with MPU6050 (3-axis accelerometer, 3-axis gyroscope) powered with 3-5V. I2C communication interface
GY-9250 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9250 chip. It has a built-in gyroscope, accelerometer and magnetometer.
GY-9255 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9255 chip. It has a built-in gyroscope, accelerometer and magnetometer
Open4 hardware extension with MEMS 3-axis gyroscope, magnetometer, pressure and temperature sensors
LPY550AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą500°/s and ą2000°/s Ranges