- -zł212.57
STEVAL-TSP001V1
ID: 196519
5906623435814
zł753.77
zł541.20
Save zł212.57
Tax included
zł440.00 tax excl.
Lowest price 30 days:
zł753.77
Power over Ethernet (PoE) demonstration board based on the L6565, STM, RoHS
STEVAL-TSP001V1
Power over Ethernet (PoE) demonstration board based on the L6565, STM, RoHS
This demonstration board is a Power over Ethernet (PoE) system used to transmit electrical power, along with data, to remote devices over a standard twisted-pair cable in an Ethernet network. The power supply fully complies with IEEE 802.3-2005 PoE specifications and delivers the rated output from any compliant source. Outputs of 3.3 V and 12 V are used as examples in this document, but other requirements can be easily met with minor changes. The IEEE 802.3af specification is intended to greatly simplify the wiring to remote equipment by providing power over the same medium that carries the signal to and from the equipment. This concept is particularly suitable for applications such as security cameras, wireless access points, and internet telephones (VoIP). The cable voltage was selected so that existing 48 V telecom equipment
Power over Ethernet (PoE) demonstration board based on the L6565, STM, RoHS
This demonstration board is a Power over Ethernet (PoE) system used to transmit electrical power, along with data, to remote devices over a standard twisted-pair cable in an Ethernet network. The power supply fully complies with IEEE 802.3-2005 PoE specifications and delivers the rated output from any compliant source. Outputs of 3.3 V and 12 V are used as examples in this document, but other requirements can be easily met with minor changes. The IEEE 802.3af specification is intended to greatly simplify the wiring to remote equipment by providing power over the same medium that carries the signal to and from the equipment. This concept is particularly suitable for applications such as security cameras, wireless access points, and internet telephones (VoIP). The cable voltage was selected so that existing 48 V telecom equipment
Features:
- Low profile, small size: 5" x 1.5" x 0.65"
- Complies with all IEEE 802.3-2005 (IEEE 802.3af) PoE specifications
- Respects source limitations
- Does not pollute power source
- 1500 V isolated outputs eliminate ground loops
- Economical output power (total power at output approximately 10 W)
- Useful output voltages:
* 12 V @0.65 A output (7.8 W, loose tolerance)
* 3.3 V @0.65 A output (2.145 W, tight tolerance) - Increased cost-effectiveness due to SMT construction (through-hole connectors for ruggedness)
Contents
- Fully Assembled Evaluation Board
- CD-ROM
196519
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K3
zł74.06
24h
Available quantity: 8
Available
Extending tile dedicated to ESP Thread Border Router. It allows you to add an Ethernet interface. Sparkfun WRL-25498
zł110.33
24h
Available quantity: 2
Available
Gigabit Ethernet expansion module with RTL8211E-VB chip (integrated Realtek Ethernet transceiver). Dedicated for Galatea FPGA development boards. Numato Lab GTETH1G001
zł319.63
3 weeks
No product available!
Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01-PIN
zł90.27
24h
Available quantity: 10
Available
Ethernet board with mini SD card slot based on W5100 controller.
zł35.24
24h
Available quantity: 6
Available
UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K7
zł72.25
24h
Available quantity: 6
Available
Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272
zł93.97
24h
Available quantity: 1
Available
Available
Available
The transceiver module of the DP83848 Ethernet interface
zł45.74
24h
Available quantity: 2
Available
EM1000-1024K-T-01 is an Ethernet module programmable in BASIC, equipped with four UART ports, flash memory, RTC, and extensive I/O capabilities. It is suitable for network and embedded projects that require Ethernet communication and integration with multiple peripherals.
zł221.40
4 weeks
No product available!
Ethernet interface controller module based on the ENC28J60 system. It communicates via the SPI interface. Waveshare ENC28J60 Ethernet Board
zł45.65
4 weeks
No product available!
IoT gateway module dedicated to industrial applications. It allows you to connect and manage different devices and systems through different communication protocols. USR-M100-ETH
zł237.21
4 weeks
No product available!
Miniature Ethernet network module with W5500 chip. It has compact dimensions, so it can be used as an element of another device
zł32.00
4 weeks
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
zł129.00
3 weeks
No product available!
Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT
zł29.24
24h
Available quantity: 12
Available
Power over Ethernet (PoE) demonstration board based on the L6565, STM, RoHS