USB 3.2 Gen1 to Gigabit Ethernet converter - Waveshare 20162

Programmable miniature Ethernet module, Tibbo Technology EM500-01

This Ethernet module allows you to easily add a wired connection to projects with 3V or 5V microcontrollers. It communicates via SPI and supports automatic DHCP setup, while the LINK and ACTIVITY LEDs indicate connection status. The module works with the Arduino Ethernet and CircuitPython libraries for easy integration into IoT projects. Adafruit 6348

Universal module supervised by the website, which can control both DC circuits as well as powered from 230 V mains. The states of digital inputs, relays and control buttons are presented on the website. AVTMOD05

The USR-IO4040 is an I/O expansion module designed specifically for use with the USR-M100/M300 modules. This module allows for the expansion of your system with additional digital ports, providing even greater flexibility in managing and controlling devices in industrial applications. With its robust construction and ease of integration, the USR-IO4040 is an excellent complement to the USR-M100/M300 gateway, enhancing its monitoring and control capabilities. USR-IO4040 

Expansion board based on the Wiznet W5200 Ethernet chip. It allows you to easily connect the Arduino to the Ethernet network. DFRobot DFR0272

The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega

The module allows the existence of devices with BLE in networks with the Ethernet protocol, has a BT2.1 receiver

Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767

The industrial switch USR-ISG1008 provides 8 Gigabit Ethernet ports and high throughput for applications requiring fast data transmission. It is suitable for automation, monitoring and vision systems environments, where reliability, durability and resistance to industrial conditions are crucial.

UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K3

EM1000-1024K-T-01 is an Ethernet module programmable in BASIC, equipped with four UART ports, flash memory, RTC, and extensive I/O capabilities. It is suitable for network and embedded projects that require Ethernet communication and integration with multiple peripherals.

A 2xUART - Ethernet converter for bi-directional communication between devices equipped with TTL UART ports and Ethernet. It is visible in the system as a virtual COM port and configured via a web page or via AT commands. USR-TCP232-E2

Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850

3xUART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website or using AT commands. USR-TCP232-ED2

Power over Ethernet (PoE) demonstration board based on the L6565, STM, RoHS

Ethernet Module